|
ZiggyW |
|
||
|
I have an old xf ute & have just been given a EL Fairmont wagon, im wanting to know if all the EL running gear will go into the ute.
I have thought that since XG-XH utes are similar vehicles to both it shouldnt be too difficult? Or am i way wrong ? |
||
Top | |
eb2fairmont |
|
||
|
Yeah it all fits. The lower firewall section on the XF-AU models is the same. Heater box is common. A few bracket items have to change if you want to run the el dash.
|
||
Top | |
Krytox |
|
|||
|
there is a number of things that need changing.
1: Sway bar (the XF one will hit the sump you need an XG one.) 2: XF (ute) will have a mechanical fuel pump. (you will need to install XG/XH tank and wire it up) 3: Need XG Engine mounts. 4: XG radiator just fits, but requires a little manipulating. also the lower water pipe is larger diameter to the EL water pump size 5: XF has imperial threads/bolts and XG has Metric. the list goes on, heres a few links: post1281226.html?hilit=XF%20ute#p1281226 post1333387.html?hilit=XF%20ute#p1333387
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
Nigel |
|
||
|
Also xfalcon.com where this is a very common conversion
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 7 guests |