|
XR9UTE |
|
||
|
Almost, you'll need to use the XH(or EL) EEC and put a distributor in the AU engine.
|
||
Top | |
Gavin Dunn |
|
||
|
ok kool wat is the best manual gearbox to put behind it i was thinkin of a t56 gearbox any advise please
|
||
Top | |
XR9UTE |
|
||
|
T56 is good yes.
|
||
Top | |
Gavin Dunn |
|
||
|
yer i heard the t5 are not that good with high power also where can i get a good 220kw motors in sydney
|
||
Top | |
sd1800 |
|
||
|
Just call around the wreckers mate.
I saw one for sale at fordpro couple years back for $3500. Fordpro are known to be abit exxy though.
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
Top | |
robby1 |
|
|||
|
you could get a t5 and get it rebuilt to handle the power. will be cheaper than buying a new t56 if u have to
|
|||
Top | |
Gavin Dunn |
|
||
|
ok thank for the advise would i have to change the tailshaft to put either a T5 or T56 gearbox and is the diff the same as the v8 or the xr8 one
|
||
Top | |
robby1 |
|
|||
|
if its an xr6 the diff should be an lsd with 3.45 diff gears i would say. not sure if the ute is the same as the sedan. not quite sure about the tailshaft
|
|||
Top | |
Gavin Dunn |
|
||
|
yer its a 3.45lsd diff is that the same as the v8 diff
|
||
Top | |
robby1 |
|
|||
|
not with the sedans. they have 3.23 lsd
|
|||
Top | |
Gavin Dunn |
|
||
|
Yer sorry I got mixed up with my mates diff iv got a 3.23lsd is that the same as the xh xr8/v8 diffs
|
||
Top | |
Gavin Dunn |
|
||
|
Hi guyz,
Its been awhile to update this build iv recently brought a nf fairlane 5ltr I have just removed the engine that ill be fitting in my xh xr6 ute i will be running a t5 manual transmission. What i have got: Complete 302 Windsor with complete engine bay wiring harness T5 manual transmission with bellhousing Clutch fork, clutch cable, excedy hd clutch kit and flywheel Manual engine ecu So my next step is to remove the complete wiring harness and fit to the xh just wondering if i can just swap the auto transmission harness and fit my existing i6 manual harness and joint it to the v8 harness, also will i need to get a tune after fitting the v8 |
||
Top | |
Nigel |
|
||
|
Im interested in why engineering is such a hassle.
For these utes, given that they were available in the V8, wouldnt engineering be relatively simple? Engineering wise it *should* have been a simple inspect, plate, and go? - or is WA that much harder than here? Pete was on the right track with the later EFI 5.8's. |
||
Top | |
Gavin Dunn |
|
||
|
Yer im not really fussed with getting it engineered for the sake that i will be fitting a 5ltr efi out of a nf fairlane and i only just need to get it inspected and adjustment of records to make sure its not dangerous and to change the engine number. just need some info on the wiring harness part since fairlanes only came with auto transmissions and ill will be fitting a manual transmission to the 5ltr and iv only got the auto complete harness.
My ute is a xhII xr6 factory manual am i able to just use the manual harness part that originally came with my ute and join to the v8 harness. Regards Gavin |
||
Top | |
Gavin Dunn |
|
||
|
UPDATE
So guyz i have removed the 5ltr out of the fairlane and removed the engine wiring harness I have fitted the manual t5 v8 gearbox with the v8 bellhousing also ill be running a heavy duty excedy clutch kit Today i have started the process of removing the 6cyl engine just neet to pull engine out now will do tomorrow and start swapping a/c line and what not and remove 6cyl engine wiring harness with computer Will upload pics soon |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 21 guests |