|
Sickn |
|
||
|
considering small supercharger for my au, i have looked into C.A.P.A. STARTING $5500 FOR KITT, would these be best value for money, or is there a cheaper supplier.
_________________ |
||
Top | |
Disco Frank |
|
|||
|
nope thats about the best price u can get..
unless u can find a wrecked car with 1 in it! but thats highly unlikley! then agian there are some dumb asses out there
_________________ RIP SCOTT |
|||
Top | |
nugget666 |
|
||
|
what sort of power figures can you get from the supercharger kit saying you put about 10,000 into it
|
||
Top | |
XRCIST |
|
|||
|
nugget666 wrote: what sort of power figures can you get from the supercharger kit saying you put about 10,000 into it
Well, if your talking about an Au, Capa's kit goes for $6300 (not sure about labour though) and on 9psi of boost they say it makes 240kw at the engine. Add a decent exhaust system and an interceptor computer and you could wind up with around 270 to 280kw.
_________________
|
|||
Top | |
FTR-XR6 |
|
|||
|
You can get rebuilt units from CAPA I believe, might be a better option for you SICKN if your not going for allout power.
_________________ |
|||
Top | |
NC 5ltr |
|
|||
|
there ba supercharged 6 get 280fwkws.
they have seen better figures but run into driveline probs
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
Top | |
nugget666 |
|
||
|
if you were to supcharge your car would hte au driveline and other things need a hell of a lot of streangthing?
if you had 180rwkw's in a au xr6 what would your 1/4 mile time be? woudl it put you in your seat? |
||
Top | |
4.9 EF Futura |
|
|||
|
Driveline would be ok with one of the stage 1/stage 2 setups. Im running the stage 1 powerdyne kit on stock everything and it's fine.
The 240fwkw quoted assumes a good exhaust. The kits come with a chip to plug into the J3 port of EEC. Driving the car without this chip would guarantee catastrophic engine failure!!! I mean, you could get a blower for cheaper than CAPA from the US - but its the bracket (capa charge $800 if bought sepreately) and pulley setups (about 7-800 i think)... But for $6k or whatever - the kits are complete and can be installed yourself. Seems like pretty good value to me. A basic powerdyne/vortech setup will throw you back in your seat and you will become quite chummy with your local tyre supplier. The dyno figures arent huge but the cars go hard.
_________________ I promise..... I will never die. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 75 guests |