|
| wtbdlltd |
|
||
|
Hey guys need a pinout sheet for EF V8 ECU, not sure if the L6 is the same bar the injectors any helps please.
Must be EF 4 Pin lines not the EL 3 line one THanks |
||
| Top | |
||
| ranga83 |
|
||
|
Ill upload scans of the factory manual pin descriptions when i get back inside in a minute. I think thats its only tells you the pin number and description, no diagram. Is that ok?
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| wtbdlltd |
|
||
|
i should be able to work out the numbers
anything would be great, i have done a loom change and i have no fuel guage no temp, no eco switch and no shift indicator |
||
| Top | |
||
| ranga83 |
|
||
|
Attachment: img173s.jpg [ 464.39 KiB | Viewed 840 times ] Attachment: img174s.jpg [ 451.57 KiB | Viewed 710 times ] Attachment: img176s.jpg [ 393.81 KiB | Viewed 752 times ]
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| wtbdlltd |
|
||
|
thanks champ i should be able to work with that
|
||
| Top | |
||
| wtbdlltd |
|
||
|
also, with the temp sensor, does it go to the ecu then back out to the dash or split and go to both, if anyone knows
|
||
| Top | |
||
| ranga83 |
|
||
|
workshop manual diagram shows one wire going to pin 38 (light green/red) and one wire joins into a grey/red wire the same as tps and air charge temp sensor
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| wtbdlltd |
|
||
|
bah, really dont want to pull the dash out again but looks like its 5th time lucky with the thing haha
|
||
| Top | |
||
| Nigel |
|
||
|
Not sure if its (still) relevant, but the Temp line only goes to the ECU. Not split to the dash. The ECU uses a Data line to transmit to the Dash Engine Temp, Injector Pulse-width, Gear position and a number of other items
The EF/EL (actual engine) harness still has provision for the Temp sensor that EB ED needs (Seperate sensor, cant for life of me remember where it is without looking at the car). That wire goes to salt/pepper shaker connectors but isnt wired past there on the EEC V. on an EB ED, that then goes straight to the dash. On and EB ED you may possibly also have a seperate climate control engine temp sensor Nigel |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |