|
FXR260 |
|
||
|
Hi guys, New to the forum so Im unsure where to start. I have a BA XR8 with a vibration/shutter in the rear end, it comes in at about 60 to 100k mark & the best way to describe it is as a vibration/shutter that goes through the whole car. The centre bearing had been flogged out so I replaced it & the uni just near it, but at this point I have not checked axles, wheel bearings or even diff oil level ( i just bought it). If anyone has any ideas Id love to hear them.
Cheers Rob |
||
Top | |
kwaussiekid |
|
||
|
Do all those checks, but my suspicion is that all the (3) mounting bushes are worn!
_________________ The older I get the better I was! |
||
Top | |
Papa Smurf |
|
||
|
I agree with Kwaussie, sounds like you need NEW bushes. You can either go the Genuine route or use the blue plastic ones, either way you are in for a bit of work.
Unless you have a whirring noise in the back end, I would look for the Bush problem. Check that the "Rose" joints are ok, the upper outer bush in the rear. |
||
Top | |
FXR260 |
|
||
|
Hi, sorry for the late reply. A rather nasty person today reminded me I put a post on this site. Problem has been solved, all it was was the 2 rear wheels needed to be rebalanced one was out 40grams the other 90grams, there were no weights on back wheels.
Cheers guys thanks for ur replys |
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 35 guests |