|
| Damian15447 |
|
||
|
hi ive bought a explorer intake for my windsor, the intake didnt come with all the bolts will i need high tensile bolts or will normal bunnings bolts do?
also the pcv valve hole is blocked off with a metal bung, does this mean the pcv valve is internal?. wouldnt have a clue as ive never messed around with explorer intakes. |
||
| Top | |
||
| Matt_jew |
|
||
|
High tensile is required.
No the PVC cannot be bunged off. It will need the bung removed and the correct fitting put in it.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Damian15447 |
|
||
|
apparently it came from an au falcon, so i will need to remove the metal bung then fit the rubber grommet and valve from the e series manifold?
|
||
| Top | |
||
| revcore |
|
|||
|
If ou can find out the length, diameter and thread type of the bolts you need then I reckon most bolt places like Coventry Fasteners will have something to suit, And in hi tensile too. What ever you do stay away from Bunnings bolts.
_________________
|
|||
| Top | |
|||
| Damian15447 |
|
||
|
old intake is off minus 2 bolt ends wich are stuck in the heads and they are so damn hard i cant drill them out. lucky i have a spare set of heads just awaiting gaskets.
|
||
| Top | |
||
| Vic |
|
|||
|
High tensile, 5/16th, UNC, 7" bolts.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 49 guests |
