Fordmods Logo

XH Diff options 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: XH Diff options
Posted: Thu Apr 04, 2013 1:00 pm 
Oompa Loompa
Offline

Age: 33

Posts: 35

Joined: 5th Apr 2008

Gallery: 1 images

Ride: 97 XH11 XR6

Location: Sydney
NSW, Australia

Hi,
iv got a 97 XH XR6 with a 5ltr in it
my limited slip diff is worn out and mostly only does single legger and is a pain on the track
im just wondering what peoples thought are with fitting a complete 9inch diff assemble out of a XD ute or getting a Kaaz centre fitted or just get my LSD recondition
Cheers Gavin.
Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Thu Apr 04, 2013 2:06 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

What useage will it be doing ???

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Thu Apr 04, 2013 2:35 pm 
Oompa Loompa
Offline

Age: 33

Posts: 35

Joined: 5th Apr 2008

Gallery: 1 images

Ride: 97 XH11 XR6

Location: Sydney
NSW, Australia

Hi,
i normally use it a daily but i do use it for track day on circuit and on wet and dry skid pans
and i am also a lead foot.
Cheers
Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Mon Apr 22, 2013 10:33 pm 
Oompa Loompa
Offline

Age: 33

Posts: 35

Joined: 5th Apr 2008

Gallery: 1 images

Ride: 97 XH11 XR6

Location: Sydney
NSW, Australia

Hi
What would you do
Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Tue Apr 23, 2013 12:09 pm 
Getting Side Ways
Offline
User avatar

Posts: 1412

Joined: 21st May 2005

Location: Melbourne
VIC, Australia

You could also look for a Hydratrak diff from an XH Outback.

 

_________________

EL Fairmont Ghia - Manual - Supercharged
- The Car
- The Headlights

Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Tue Apr 23, 2013 1:51 pm 
Stock as a Rock
Offline
User avatar

Age: 43

Posts: 131

Joined: 16th Mar 2008

Ride: XG ute, XT sedan

Location: Crazyburn
VIC, Australia

If you are going to give it a hard time, i would look at one of those Kaaz centers, as lsd's never last.
Not cheap but supposed to be very good and dont ware like factory lsd's.
http://www.kaazusa.com/
Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Tue Apr 23, 2013 2:10 pm 
Getting Side Ways
Offline

Age: 48

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

9" is a lot of dead weight and overkill now days unless you are making lots of power.
You can actually feel the power loss when you drive once its fitted.
Rebuild the borg warner and fit a lock right locker to it.
I had one done in my old NF 5.0. 3.45's and a lockright.
Was absolutely mental to drive.
My diff lasted with me driving it with numerous trip to WSID with BIG burnouts and canned on the street. Then when I stripped the car the diff went into dc_todds old Green Pig EF XR6 where it was flogged from the time it was started to the time it was turned off.
Once that car got writted off , the diff ended up in Troymans ED XR6 Turbo where it copped more punishment and burnouts at WSID with lots of power.
Now the diff has been removed from that and gone back into dc_todds EF Racecan where it gets flogged on the track.
It has copped all that and still doesnt even make a whine.

My recommendation with a 5.0 would be fit a lock right and a set of 3.9 gears. I have 3.9's in my AU 5.0 manual ute and its great to drive. I would of gone lockright again but unfortunately when my diff went bang the dollars wouldnt stretch to me buying another one at the time , so I am currently making do with a tightened limo.

In Sydney I use and strongly recommend Bears Diffs at Dunheved.

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Wed Apr 24, 2013 1:42 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

Gavin Dunn wrote:
Hi,
iv got a 97 XH XR6 with a 5ltr in it
my limited slip diff is worn out and mostly only does single legger and is a pain on the track
im just wondering what peoples thought are with fitting a complete 9inch diff assemble out of a XD ute or getting a Kaaz centre fitted or just get my LSD recondition
Cheers Gavin.


You won't find a factory fitted 9" diff in an XD....XC was the last Falcon to be fitted with them from factory......just sayin.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: XH Diff options
Posted: Wed Apr 24, 2013 1:58 am 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 1204

Joined: 24th Apr 2010

Gallery: 1 images

Ride: Ef Fairmont

Location: Bleakheath
NSW, Australia

Matt_jew wrote:
9" is a lot of dead weight and overkill now days unless you are making lots of power.

+1
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 3:19 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names