|
ea street sleeper |
|
||
|
Howdy doodey fellow peeps, i been workin on a intercooled m90 install on my falcoon, eventually ill be running 12psi megasquirt, 42lb injectors and walbro intank but i seen this turbo kit on ebay http://item.mobileweb.ebay.com.au/viewi ... 8581926733 and noticed hes running 6psi with no tuning and no other upgrades except a fuel reg.
Now my question is if i purchase a 6psi pullet for the time being would i be able to just upgrade thw fuel reg and leave all else alone and just slowly upgrade as i go running 6psi and just a high pressure fuel reg oh its a ef sohc engine
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
Top | |
Shortshift |
|
|||
|
IMO adding boost with no options to change fuel and timing is going to create problems. If you take it easy on the throttle you might get away with it. What fuel reg are you planning to use? I think someone mentioned using an AU fuel rail with a BA XRT fuel reg.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection Last edited by Shortshift on Wed May 08, 2013 10:34 pm, edited 1 time in total. |
|||
Top | |
ea street sleeper |
|
||
|
Im not exactly sure what fuel reg if i go 6 psi at first, thats another thing i was going to ask.
Once the 12psi is going ill be running a 12:1 rising rate fmu but yea it only got me thinkin cos the whole blower kit is ready to go i just need the fuel side of things but if i can run 6 psi with just upgrading a fuel reg like this guy reckons he can do with that turbo kit in the link ill be able to bolt it on now and then once i got the fuel system i need for the 12psi ican change my pulley over n im sweet
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
Top | |
Shortshift |
|
|||
|
I bought Troyman's Raptor SC and still haven't got around to getting the car on the road. I bought a 12:1 fuel reg to go with the SC but the tuner, I use, said he can adjust the fuel using the J3 chip. Hence, I'm now using an ELXR6 fuel reg, and changing to 26lb injectors when I get the car on the dyno. Are you planning to use a wideband air/fuel gauge?
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
Top | |
ea street sleeper |
|
||
|
Ummm whats a wideband air fuel gauge lol is that the air fuel mixture onw cos i have one butni dunno what wideband is lol
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
Top | |
ea street sleeper |
|
||
|
Ummm whats a wideband air fuel gauge lol is that the air fuel mixture onw cos i have one butni dunno what wideband is lol
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 40 guests |