|
bomba32 |
|
|||
|
||||
Top | |
Stealth6 |
|
|||
|
nothing to do with lowering it, but dude, give that thing a bloody cut and polish!
_________________ Yep, I don't know what to write here... |
|||
Top | |
bomba32 |
|
|||
|
haha i just did last night actually
|
|||
Top | |
evxr6 |
|
|||
|
Do think about practicality. Don't lower too much, lows or super lows are ok. Do get shortened shocks if going to super lows.
Do not chop springs... |
|||
Top | |
roughredXR6 |
|
|||
|
How low do you want to go? XR6 spec springs and shocks will drop it a bit and make it corner much better.
Be aware though, if you go too low you will kill the handling and make it a really rough ride. But if you don't care how it rides or handles, EF's look mad dumped on their guts with some super low springs.
_________________ Ported ED XR6 head shaved too much, AU gasket, custom Crow Cam, Pacemaker 4480's, 5-speed conversion, billet aluminium flywheel, GT clutch, T.I. Performance J3 chip, custom water/methanol injection, modified BA throttle body. Paint&Panel by Barbed Wire Fence. |
|||
Top | |
tearlejc |
|
||
|
I gotta say mate, looking at that picture there doesn't appear to be a hell of a lot of room there if you lower it too much...those tyres look wide enough that you might have issues if you go too low...
_________________ 351 4V XB Coupe running LPG |
||
Top | |
cjh |
|
||||||
|
This is XR6 height, and the genuine Ford mud spats hit/scrape on the speed bumps at work and some shopping centres.
Those tyres are 25mm more in diameter than the stock ones....235/60R15 vs 205/65R15. It handles like a train on rails too, though due to other suspension mods.
_________________ http://youtu.be/jJTh9F3Vgg0 |
||||||
Top | |
bomba32 |
|
|||
|
How much lower do they make them from stock
|
|||
Top | |
roughredXR6 |
|
|||||
|
Mine had super lows in it when I got it, handled like crap and scraped on everything. Threw in a set of xr spec springs and short shaft shocks, now rides and handles million times better, and on 235/45/17 rubber still looks way lower than standard gli.
_________________ Ported ED XR6 head shaved too much, AU gasket, custom Crow Cam, Pacemaker 4480's, 5-speed conversion, billet aluminium flywheel, GT clutch, T.I. Performance J3 chip, custom water/methanol injection, modified BA throttle body. Paint&Panel by Barbed Wire Fence. |
|||||
Top | |
79 raven |
|
|||
|
{USERNAME} wrote: This is XR6 height, and the genuine Ford mud spats hit/scrape on the speed bumps at work and some shopping centres. Those tyres are 25mm more in diameter than the stock ones....235/60R15 vs 205/65R15. It handles like a train on rails too, though due to other suspension mods. {DESCRIPTION} That was mine on xr spec's with sharkfins. I was running I think 215/65r15's on it at the time and have now changed to xr spec tyre size ( think 225/50's?) making it a tad lower than the pic. Ive taken the mud guards off as they scrapped all the time and she still scrapes out from time to time. Handles like its on rails like cjh said too. Unless you wan to dread every carpark, bump in the road, speed hump or anything thats not dead flat Id just go the xr spec lows personally. Ive had dumped cars before and let me tell you, it gets old after a while due to the scraping. |
|||
Top | |
79 raven |
|
|||
|
{USERNAME} wrote: How much lower do they make them from stock Xr spec or lows I thinks about 30mm lower than stock. |
|||
Top | |
bomba32 |
|
|||
|
Thanks for the help my mechanic mate has a deal for me for $450 for springs and labour so will talk more with him and see where to go from there.
|
|||
Top | |
gregrobinson85 |
|
|||||
|
Post some pics if you lower it. Im trying to decide what springs i will put in mine. I have a 5.0L DF LTD. I hear super lows in the rear and ultra lows in the front look really good. anyone have an opinion on this? im not looking for practability as my ltd will only leave the shed a couple of times a month.
|
|||||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 45 guests |