hi guys ive go some parts hers for sale
prefer pickup on the north side of the act, will not post the larger items. listed else where

pwr heavy duty trans cooler, has 3/8 10mm barb fittings and enough hose to reach the fittings on the trans itself, used for less than 3000km, removed due to fitting t5 manual. $100

raised king springs to suit xg ute, may fit other x models, king parts number kff02 $80

genuine ford special tool spring compressor to suit x-models, will definatley fit xd-xg, more than likely fit the earlier stuff to but no 100% sure, this is a genuine item and as rare as rocking horse crap, in my opinion this is the only SAFE way to remove and fit springs in your x model ford. you remove shock and this slips down through the top of the shock tower and bolts to the spring saddle, the saddle is undone and you wind up the compressor aim the spring out and loosen $150

interior light lens, brand new unopened to suit xd-xg $10

k&n pod filter with 3inch opening with 90degree silicone hose had fitted to log manifold 4L done less than 1000km. $40

rosta 250-1223 universal electronic cruise control kit. this is a proper electronic kit. no dam vacuum signals to worry about. comes with stalk type buttons.cost me $300 from USA. sell for $150

 

 

Attachments:

P1060007.JPG [ 262.19 KiB | Viewed 209 times ]

P1060010.JPG [ 207.28 KiB | Viewed 209 times ]

P1060008.JPG [ 246.67 KiB | Viewed 208 times ]

P1060016.JPG [ 144.87 KiB | Viewed 200 times ]

P1060015.JPG [ 132.21 KiB | Viewed 217 times ]

P1060004.JPG [ 148.2 KiB | Viewed 218 times ]

P1060014.JPG [ 129.44 KiB | Viewed 204 times ]

P1060013.JPG [ 103.35 KiB | Viewed 230 times ]

P1060012.JPG [ 170.49 KiB | Viewed 211 times ]

P1060011.JPG [ 86.85 KiB | Viewed 195 times ]