|
| BSZERK |
|
||
|
Gday fellas I've purchased a ed xr6 and it has a el xr6 motor in it, its running the ed computer, should the computer have been changed to the ed one or are they the same
Cheers |
||
| Top | |
||
| Shortshift |
|
|||
|
If you want the BBM operate, you need the EL ECU, the vacuum solenoid and some extra wiring. You also need to get around Smartlock on the EL ECU with either a bypass module or a J3 chip.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Mad2 |
|
|||
|
my understanding is leave as is IF you want to run or have the EA/B/D inlet manifold BUT if ya wanna run the later manifold yes you will need ta change it and alter sum wiring
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
BSZERK wrote: Gday fellas I've purchased a ed xr6 and it has a el xr6 motor in it, its running the ed computer, should the computer have been changed to the ed one or are they the same Cheers sorry just reread....... same/similar |
|||
| Top | |
|||
| BSZERK |
|
||
|
It's still running the ed manifold
|
||
| Top | |
||
| Mad2 |
|
|||
|
if ya happy with the way it is .. leave it
if ya change to a later model ECU you will need ta change a few thing around plus sum rewiring |
|||
| Top | |
|||
| BSZERK |
|
||
|
Cheers, it running way to rich I have a o2 sensor on its way so I'll replace that, it's also got a turbosmart rate rising fuel reg, do you know what pressure it should be running
|
||
| Top | |
||
| Mad2 |
|
|||
|
||||
| Top | |
|||
| TROYMAN |
|
||
|
I would get rid of the aftermarket fuel reg, its a wast and un necessary on the n/a 6, the falcon already runs a little rich stock, so adding aftermarket fuel reg is just adding more fuel that's why its running so rich..
std fuel reg is 36psi at idle and arould 40 psi under load/ no vacuum |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
275kpa with no vacuum on the reg.
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| BSZERK |
|
||
|
No worries I'll put a standard one back on, its also running a big aeroflow pump as it was getting set up for a turbo, it's got a camtech 345 and a ported and polished head on it, I've got the manifold and cooler in the shed
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
