|
Dylanmoore |
|
||
|
ok so im currently in the middle of changing my clutch in my ef but having some trouble getting to the top 2 bellhoising bolts on the passenger side that are just above the starter motor, has anyone got some advise on the easiest way to get these out?
|
||
Top | |
EFFUTURA4.05SP |
|
|||
|
The first time I did my clutch, I just used a long extension and uni joint.
They were quite tight, but I got there. Once the gearbox is out it opens the space up a bit to get to the bell housing bolts Or try dropping the gearbox mount to open the gap a bit. Tilt the engine and box back.
_________________ 1996 EF Futura factory manual |
|||
Top | |
89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
19mm ratchet spanner. Works a treat
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
Top | |
Dylanmoore |
|
||
|
cheers guys il try it with the gearbox out in the mornin
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 42 guests |