G'day Everyone

First things first, yes i have done a search and i can't seem to find an exact answer...

I've got most of it figured out, i'm just confused as to what end you hook the wires up to.

You cut the red/yellow and yellow/black wires coming from the BEM.
then you locate the brown and white wires coming from the black control box supplied with the kit. I have but the brown and white wires and i realise the r/y and y/b go to the brown and white wires.

But once you cut the brown and white wires which end do i connect the wires from the BEM to? Do they connect to the end of the brown and white wires i've just cut off the black box so they hook directly into the box or do i hook them up the long bit of wire i have just cut off (the loom)

hope that makes sense, i'm just confused about what end you hook them up to.

Then i presume the other ends of the R/Y and Y/B hook to the blue and green wires directly to the black box or do they also connect to the long bit of wire i've just cut off?

Then if i have them hooked up what wires to i run to the master actuator? and then i connect into the factory loom to control the others?


Thanks!!

Sorry wrong location!!!!!