Are you fitting the serpentine setup as well as the BBM?

yes, already have the el ecu, will get another eb2 loom to mod to suit the engine, and get rest of the ef/el parts to run including bbm with vaccum solenoid etc, still gonna paint it and redo wiring.

and yes grind the sump...

Grab and AUII/III or BA/BF Alternator. Plugs straight in and you don't have to change the plug. If you use an AUI then you need to change the Plug. Have 2 AUI's with plugs if you are interested. You will need to change the AU Upper BBM as well as the throttle body to EF/EL and also get an EF/EL Thermostat housing.

Ive got a full instrument cluster from an XG S pac ute if your interested.
Straight swap in and you get the white numbers.
PM me if your interested.

SWC yeah been researching what I needed, will look for a ba alt though

Matt_jew, how much?

Taken Wiring off and spark plug leads, coil pack that I wont need, anyone know a good way to clean the head inside the spark plug ports?, got crap down there and dont want it to go into the hole to the valve and piston heads etc.

Gonna get a angle grinder soon and grind the sump, then degrease it all down, and then start to give it a paint to freshen it up, while I wait to get the accessories.

(For some reason I posted this yesturday but didn't show?)

Hey guys, selling the EB in a month time and getting a 97 EL Futura Wagon, putting a deposit on it next week and then wait for the tax return in july etc, here are some pictures,






Coming from a old couple who has always kept it serviced, gave it a test drive and it was great, better then the EB that's for sure, does have a few little things to attend to like sagging roof (mainly at cargo area) and side mirror needs replacing and needs a good polish (eventually repaint) but nothing major, engine and driveline all good, also comes with a heavy duty tow bar (getting a trans cooler before I tow though!).

Selling the EB to me girlfriends brother who has only just gotten his P's, so that will still be in the family lol, not sure what I'm going to do with the AU Engine now, may either sell it and put the $$$ to the wagon, or keep it and do it up slowly, kinda going with selling it at this rate..

Looking forward to it, going to get a cargo cage and the 7 seater so when me mum is down from bendigo etc, wish July will hurry up now.

Let me know what you's think.

hey all, do these wagon have holes for the extra 7 seater or do I need to drill holes etc?

Thanks.