|
| Falcon96XR6 |
|
|||
|
Hi all, just done a head gasket and now my xr6 wont fire, every now and then it has a cough but thats it, is it possible to get the camshaft in 180 degrees out? As the dizzy is on number one at TDC, cheers
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| 96ELGli |
|
||
|
Hi,
Yes it is possible with most engines. You can take off the rocker cover and look, or take out No 1 spark plug. Put a cork in and wind the engine over. ( not use the starter ) On the compression stroke the cork will pop out, then look at the Dizzy. Regards 96ELGli
_________________ Regards 96ELGli |
||
| Top | |
||
| Falcon96XR6 |
|
|||
|
Hi,
Thanks so much for the reply, ended up sorting rhe problem out yesterday morning, it wasnt on the compression stroke when the dizzy was pointing to nunber one, so therefore on TDC it was pointing to number 6 ahah, thanks for the info 
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
