|
| BSZERK |
|
||
|
Hey fellas, I took my rocker cover off for a look today cause I've got a noisy lifter, I noticed that the rear drivers side rocker arm has movement from side to side but the rest were solid I could not move them, I also had 1 shim under 1 of the lifters but none of the others had them, Why would there only be one, I took it out but still no difference in noise
Cheers |
||
| Top | |
||
| ranga83 |
|
||
|
all the lifters should have 1 shim under them for a stock cam or a billet. most regrinds will have 2 shims.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| BSZERK |
|
||
|
I thought you only needed shims for a regrind cam, mine cam is a camtech 345
|
||
| Top | |
||
| ranga83 |
|
||
|
nah, you still have 1 shim per lifter for a standard or billet. you need the extra shim to take up the amount they grind off a regrind
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| ranga83 |
|
||
|
are you sure the other shims werent in the rocker arm.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| BSZERK |
|
||
|
Just worked out that it was a lash adjuster base plate not a shim so I best be putting that back in in the morning
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |