|
| TURBO_GHIA |
|
|||
|
hey
does anyone have a decent wiring diagram for a ems 6680 ? its in a EL but im going to be using EF cam and crank sensor and 6 coils . cheers jarrod
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
I have the one from ems that they have on there web site,
are you having difficulties with it?? |
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
i just cant get my head around it , i hate wiring with a passion . would just like something to make it easier .the ems just isnt a very good diagram . doesnt tell you which is earth and positive for the sensors . unless im missing something .
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
generally the coloured wires are the inputs from the sensors, the earth or signal ground is the same as the common earths that join the body..
so eg grey/blue wire pin b2 goes to the signal wire from the sensor.. (el ecu) pin 7.. the black/white wire from the sensor is the one that joins to the common earth wires from the ems that go to the body.. are you running it piggy back with the factory ecu?? |
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
Yeah will be running it piggy back .
So I've got air temp and water temp sep . So don't need to worry about them . Tps I think I tapped into the standard wire when I had the wolf .
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
