Fordmods Logo

How can i get easy power out of a 250 crossflow ? 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: How can i get easy power out of a 250 crossflow ?
Posted: Wed Jul 10, 2013 7:53 pm 
Oompa Loompa
Offline

Age: 26

Posts: 25

Joined: 29th Jan 2013

Gallery: 2 images

Ride: XG ute

Location: mackay
QLD, Australia

Easy power out of a 250 crossflow carb advice appreciated.
Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Wed Jul 10, 2013 8:56 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

how much do you wanna spend?

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Wed Jul 10, 2013 9:52 pm 
Oompa Loompa
Offline

Age: 26

Posts: 25

Joined: 29th Jan 2013

Gallery: 2 images

Ride: XG ute

Location: mackay
QLD, Australia

$2000
Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Wed Jul 10, 2013 9:54 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

Well, that won't get you far. Extractors, exhaust, cam, roller rockers, Redline manifold and a 500 holley. That would be pushing it. And maybe only 130-140rwkw

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Wed Jul 10, 2013 9:56 pm 
Oompa Loompa
Offline

Age: 26

Posts: 25

Joined: 29th Jan 2013

Gallery: 2 images

Ride: XG ute

Location: mackay
QLD, Australia

it will only be for a p plate so that isnt bad, thanks for the ideas
Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Thu Jul 11, 2013 1:51 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

89.SVO wrote:
Well, that won't get you far. Extractors, exhaust, cam, roller rockers, Redline manifold and a 500 holley. That would be pushing it. And maybe only 130-140rwkw


130 to 140 rwhp ??????......must be a towing cam then ?????
This had 275 rwhp.
Headers, 3" exhaust, Crow cam, Redline 4 barrel intake, 600 Holley, roller rockers, MSD ignition, and a regraphed dizzy, and a p&p head, with 10:1 CR on pump 98, and was pulling to 6,500 rpm.

Again, depends on how far ya wanna go.

 

 

Attachments:
Natans XF ute 011_resize.jpg
Natans XF ute 011_resize.jpg [ 253.37 KiB | Viewed 495 times ]

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Thu Jul 11, 2013 6:28 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

He said rwkw not rwhp lol. Bloody school holidays

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: power out of a 250 crossflow
Posted: Thu Jul 11, 2013 7:54 am 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

cjh wrote:
89.SVO wrote:
Well, that won't get you far. Extractors, exhaust, cam, roller rockers, Redline manifold and a 500 holley. That would be pushing it. And maybe only 130-140rwkw


130 to 140 rwhp ??????......must be a towing cam then ?????
This had 275 rwhp.
Headers, 3" exhaust, Crow cam, Redline 4 barrel intake, 600 Holley, roller rockers, MSD ignition, and a regraphed dizzy, and a p&p head, with 10:1 CR on pump 98, and was pulling to 6,500 rpm.

Again, depends on how far ya wanna go.


and he had a max of $2000. I said 500 holley, no MSD, standard dizzy, standard head, standard comp. What you said above would've been about $5000

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: How can i get easy power out of a 250 crossflow ?
Posted: Fri Jul 12, 2013 2:31 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

At the time, the guy was lucky, he already had a 4 bbl intake, ( wasn't fitted ), the engine was existing with a middle of the road cam, and a 2 bbl Weber on it.
We did however got the head shaved, ( the donk had flat top pistons in it already ), got a Crow Cam, valve springs and a timing chain set, roller rockers, MSD 6AL, and I had a few 600 Holleys sitting around, he had some too, just fitted it with a rear power plate, and centre float bowls, and cut out the choke horn, and rekitted it.
I regraphed the dizzy, and altered the internals of the mechanical fuel pump, as well as p&p'd the head as well as port matching the intake to the head.
We are both mechanics, but I know how to modify stuff, he doesn't, so I learned him up a bit.
It would light up a pair of 265/70R15's in 2nd gear, and chirp it good into 3rd.
It had a singlerail 4sp, and a 2.92 LSD with disc's.
We put those tyres on it to give it some traction, the 235/45R17's weren't cutting it.
I think we spent about $2,000 doing what we did.....that was in 2006.

 

 

Attachments:
Natan's XF ute 002_resize.jpg
Natan's XF ute 002_resize.jpg [ 94.78 KiB | Viewed 477 times ]

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: How can i get easy power out of a 250 crossflow ?
Posted: Fri Jul 12, 2013 8:17 am 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

i'm assuming OP has a stock engine. Also, it's 2013, s**t is expensive now lol

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: How can i get easy power out of a 250 crossflow ?
Posted: Sat Jul 13, 2013 12:09 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

89.SVO wrote:
i'm assuming OP has a stock engine. Also, it's 2013, s**t is expensive now lol


Yeah....I know......it's still a case of how fast do ya wanna go......and what do you expect for the money spent ??????

Spend 2 grand on the wrong stuff/place, and there could be huge disapointments.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 11:23 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names