|
| shipo_1150 |
|
||
|
Hi guys.
I just brought a manual conversion for my ef fairmont. Theres a few questions I have regarding parts. Do I need manual console? Can I use my auto tailshaft or is it to long and It came with a ed xr6 ecu, Im pretty sure I need a ef one as mine is coil pack? I waiting on peddle box. Flywheel and Is the bellhousing different. So far I Box Clutch kit Bearings Loom Sandwich Plate? Is there any other parts I need My knowledge of these are very limited. Any help would be great |
||
| Top | |
||
| SWC |
|
||
|
As long as it is a E series T5 then the tailshaft will be fine. If it is an AU T5 then you will need an AU Manual Tailshaft as the extension housing on the AU T5 is longer.
You will not be able to run the ED ECU as you are correct in needing an EF ECU. EB/ED/EL have different number of pins to the EF ECU. EF are 104 pin. You can do the resistor mod to keep the Auto ECU. You will need a Manual Bellhousing. |
||
| Top | |
||
| ranga83 |
|
||
|
you will also need a clutch cable, and consoles are the same AFAIK, you just need the manual gear stick boot.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| shipo_1150 |
|
||
|
Ok thanks guys that clears it up for me. Im getting my mechanic to do it anyway so I'll proberly get a j3 and I'll chase the guy I brought it off for the bellhousing, Just forgot to get the cable from him last night.
Has anyone triedbor have a momo/saas boot gear as I after a black leather one. There on ebay |
||
| Top | |
||
| ranga83 |
|
||
|
when you get the bellhousing, make sure you get the clutch fork and cable insulator. im not sure you can still get them from ford.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| shipo_1150 |
|
||
|
His got a new clutch cable for me. Does the insulator come with the cable normally.
|
||
| Top | |
||
| ranga83 |
|
||
|
no, its in the clutch fork. i cant remember the part number. they used to be on ebay, but i havent seen one since i got mine. papa smurf might be able to help with p/n and availability
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |