ok ... bought a AU series 3 sedan not long ago .... one [of many ] of its faults is it gets quite a bit of water in the boot? .. is fitted with a rear spoiler altho unsure if factory. afta getten her a*** dry i put her outside ta give me some room.....


afta a coupla days outside with a bit of rain .. i checked the boot and woohoo ... it errr dry

howeva .. i now find that due to the 'excellent' rain we had down here taday ... it's now gots some water

i have NO idea how .. but the water shows up as condensation on the inside of the boot lid plus excess water collects inside the boot lid shell

anyone had this problem before OR know HOW ta fix this errrr ... 'small' problem



thanks

water might be getting in through the hole for spoiler light wires, I undid mine lifted the spoiler and sealed around the holes with urethane.. so far so good..

i thought that ... so removed the spoiler & put some tape from work over the holes ta seal it - which i'm pretty sure it has done. incase - i put some ova the numba plate screw holes [coz i missed em lol]. howeva coz it had so much 'condensation' on the inside roof of the boot lid . . . . . i'm a wonderin...


spoiler when removed ONLY had ONE gasket unda the drivers side foot/base

Check for rust holes around the boot struts and also under the rubber boot seal.