Hi i am after any help i can get,i have a AU1 ute and i would like to fit a complete AU1 fairmont dash i have 3 things that worry me 1.what do i do with the rear window wires,can they just be cut off.2.i am not going to have ABS so what do i do with the wires from that.3 if i leave the wireing in the engine bay i think the only thing i have to do is add the cruise controll wires after,if i use the harness from the fairmont i will be left with tha abs unplugged, I am planing to use the computer and all the interier harness,if anybody has done this i would love to hear from you with any advice
Brian

Find Matt_Jews build thread. he has done this exact thing and has either written about it of can provide insight into it for you.

It is a very easy job, dirrect plug and play actually.

Hi
i did that same swap last xmas
only changed dash loom with dash left engine bay and cabin looms as stock
only problems i had was i needed to run a couple of wires for power windows
water level
and economy switch as mine was a 3 seater
as they say cruise is plug and play but make sure you get switch for end of master cylinder otherwise it dont work