|
| pjaez |
|
||
|
hOW DO U CHANGE THE TUNE ON A J3 CHIP. MINE WAS PREPROGRAMED but is dumping in far to much fuel and just about fouling up plugs within 10 mins of running
_________________ 98 el fairmont, 3inch straight pipe with gt3540 log manni 650cc injectors steel heady valve springs water to air intercooler running through a/c radiator |
||
| Top | |
||
| ranga83 |
|
||
|
if you dont have a programmer, then you would need to send it back to where u got it from, or take it to a dyno tuner who can reprogram it
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| ranga83 |
|
||
|
did you clean the j3 port properly before installing? as in scrape the clear s**t off the pins, not just wipe the white paste off?
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| pjaez |
|
||
|
no i have the programer its just when i have the chip in the programer plugged into pc i open tuner pro rt and it doesnt auto detect and i wanna bring up the ve tables but cant as tunerpro is not detecting chip. j3 port is spotless so thats not problem. im running a 550hp pump but i told jason from ti that
_________________ 98 el fairmont, 3inch straight pipe with gt3540 log manni 650cc injectors steel heady valve springs water to air intercooler running through a/c radiator |
||
| Top | |
||
| ranga83 |
|
||
|
with tuner pro open, what does it say down the bottom left corner? no hardware found? or ostrich v10.10.0?
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| pjaez |
|
||
|
bottem left in red not emulating and beside that it says ostrich v10.10.0
_________________ 98 el fairmont, 3inch straight pipe with gt3540 log manni 650cc injectors steel heady valve springs water to air intercooler running through a/c radiator |
||
| Top | |
||
| ranga83 |
|
||
|
ok, well its reading the programmer, click the blue arrow pointing down (up the top of screen) that says "download bin from emulator to tunerpro" obviously with the chip plugged into the programmer
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| pjaez |
|
||
|
it comes up with no xdf file specified, or xdf specifies bin of 0 size
_________________ 98 el fairmont, 3inch straight pipe with gt3540 log manni 650cc injectors steel heady valve springs water to air intercooler running through a/c radiator |
||
| Top | |
||
| ranga83 |
|
||
|
what car is the tune for? you'll need to download an .xdf from the ti site to match the .bin
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| pjaez |
|
||
|
its for a 98 el fairmont that i have just put a turbo on i got chip pre programmed before he sent it over as i in nz. but yeah way to rich
_________________ 98 el fairmont, 3inch straight pipe with gt3540 log manni 650cc injectors steel heady valve springs water to air intercooler running through a/c radiator |
||
| Top | |
||
| ranga83 |
|
||
|
check your PM's
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |