hey guys, my step mum has a ba xr6 sed with ssl king springs all around. she wants to put the standerd springs back in front and back and replace the shocks in the back to tow a caravan. iv done all this work on my ef but cant really see how it's done on the ba....can any one give me some advice?

Front
Pretty much the same as an E series or an AU

Rear
1. Take the wheel off
2. Loosen off rear shock, top fixing
3. Allow rear control arm to drop to lowest point (lever down a bit if required)
4. Take out existing spring and fit in new one (ensure top/bottom is correct)
5.Install the new springs neatly in the saddles, ensure that top/bottom
of spring is correct.
6.Re-fix top of shock.
7.Refit wheel.
8.Finish with a professional rear wheel alignment and camber adjustment
to tidy up. (Adjustments are available on the XR6/8, not the XT)