|
| Falcon96XR6 |
|
|||
|
Hey there,
Now i know this is a stupid question, but anyways.. im converting the el to t5 shortly and im gonna use a malwood clutch pin, im all good with everything i have to do, but how do i get a clutch pedal? I thought they wouldve been welded to the manual pedal box? Or are they bolted? Can i just ring dapto pick a part and ask them for a el clutch pedal? Its the only thing thats got me stumped, and ive tried searching for it but cannot find the answer, thanks everyone (:
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| evxr6 |
|
|||
|
The pedal slips over the malwood pin at the pivot point. It's secured via a split pin. Make sure you get the nylon bushes and grease them up. They are important.
|
|||
| Top | |
|||
| Falcon96XR6 |
|
|||
|
Hey, thanks for the reply, i know how the pin works etc but i dont understand how to get a clutch pedal off a manual pedal box, i dont have one to have a look at :s cheers
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| ranga83 |
|
||
|
its clipped on, pull the clip, slide the pedal off.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Falcon96XR6 |
|
|||
|
Okay thanks mate, thats all i need to know,
Cheers everyone (:
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| shipo_1150 |
|
||||
|
Hope this helps, I'v a pedal box sitting here waiting to go in. So if you need more pictures let me know
|
||||
| Top | |
||||
| Falcon96XR6 |
|
|||
|
Oh thanks, so where the split pin is is where the clutch cable goes and then another pin to take the complete pedal off the box? Thanks heaps
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| shipo_1150 |
|
||
|
I would guess so. Someone else can confirm that
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
