|
| grease monkey |
|
||
|
Hi guys converting my eb auto to manual.Have a mal wood pin kit and on the auto pedal box there is no spot for the neutral start switch,what mods do you need to do to the manual ecu to get it to run cheers Anthony.
|
||
| Top | |
||
| TROYMAN |
|
||
|
you don't need a neutral switch, it was actually deleted from the pedal from eb2, only other switch that is used is cruise control deactivation
|
||
| Top | |
||
| grease monkey |
|
||
|
{USERNAME} wrote: you don't need a neutral switch, it was actually deleted from the pedal from eb2, only other switch that is used is cruise control deactivation Thanks troyman does it matter that the manual ecu is out of early ea spack 3.9 |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: you don't need a neutral switch, it was actually deleted from the pedal from eb2, only other switch that is used is cruise control deactivation Thanks troyman does it matter that the manual ecu is out of early ea spack 3.9 no, it will work fine, but the smartlock feature of the ecu is not in ea , so it will still start and run fine just as other the other ecu did, just no ecu immobilisation from smartlock |
||
| Top | |
||
| grease monkey |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: you don't need a neutral switch, it was actually deleted from the pedal from eb2, only other switch that is used is cruise control deactivation Thanks troyman does it matter that the manual ecu is out of early ea spack 3.9 no, it will work fine, but the smartlock feature of the ecu is not in ea , so it will still start and run fine just as other the other ecu did, just no ecu immobilisation from smartlock |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |