|
| lowlane98 |
|
||
|
Hey guys,
As the subject describes ive got a 2010 fg turbo ute and the keyless entry has stopped working  Im not sure what do to from here on i don't know if its the remote or something else? It would be great if someone could help me with this issue.  Cheers Lowlane98 |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
First thing is to try replacing the battery in the remote.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| lowlane98 |
|
||
|
{USERNAME} wrote: First thing is to try replacing the battery in the remote. How do i do that i pulled the key part away from the remote, so how do i get to the battery? Cheers |
||
| Top | |
||
| lowlane98 |
|
||
|
All good i just figured it out, Cheers
|
||
| Top | |
||
| lowlane98 |
|
||
|
well i swapped the battery over with a new one in the remote and it is still not working? any other ideas? Or do i have to reprogram the remote since i put the new battery in? I dont know what to do
 Cheers Lowlane98 |
||
| Top | |
||
| lowlane98 |
|
||
|
Is there a specific way to program it? i followed the ba-bf guide to reprogramming the remote but it still doesn't work!! has anyone else had this issue? Could it be the remote sensor in the car or the remote itself?
If it is the remote or the sensor would that be a warranty replacement maybe? Any help would be great as im tearing my hair out!! |
||
| Top | |
||
| lowlane98 |
|
||
|
anybody??
|
||
| Top | |
||
| Andrew S |
|
|||
|
I have changed the battery in my remote a few times. It did not affect the operation at all.
Other than that, sorry can't help.
_________________ So many women - so little time |
|||
| Top | |
|||
| Andrew S |
|
|||
|
Just a thought, is there a little light on your remote which lights up when you press a button?
If so, is it lighting up when pressed?
_________________ So many women - so little time |
|||
| Top | |
|||
| TedW |
|
||
|
changing battery doesn't affect remote programming - do you have another remote to try - does central locking work from switches/door locks etc. ? - check in ICC menu under locking to make sure you haven't turned remote locking off - check if remote works by holding against radio set on weak station- volume up and pressing remote and listening for interference on radio when you press remote -if vehicle is still in warranty period should be covered except if locking is turned off or some kind of physical damage ie.remote dropped etc.
program remote - doors closed - accessory position - 3 pushes of rear demist button- door locks should cycle then push button on remotes.... |
||
| Top | |
||
| lowlane98 |
|
||
|
{USERNAME} wrote: changing battery doesn't affect remote programming - do you have another remote to try - does central locking work from switches/door locks etc. ? - check in ICC menu under locking to make sure you haven't turned remote locking off - check if remote works by holding against radio set on weak station- volume up and pressing remote and listening for interference on radio when you press remote -if vehicle is still in warranty period should be covered except if locking is turned off or some kind of physical damage ie.remote dropped etc. program remote - doors closed - accessory position - 3 pushes of rear demist button- door locks should cycle then push button on remotes.... Thankyou for your help guys, i tryed doing as you said but still had no luck which is very annoying . I was going to tryt and disconnect the battery but i wasnt sure if it would make any difference at all.Yes my car is still in the extended warranty so i think its up to ford to figure it out. Cheers Lowlane98 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 19 guests |
