Fordmods Logo

XH with a few issues. 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: XH with a few issues.
Posted: Mon Dec 09, 2013 10:47 pm 
Fordmods Newbie
Offline

Age: 30

Posts: 3

Joined: 9th Dec 2013

Ride: xh long reach

Location: Melbourne
VIC, Australia

Hi,

I recently bought a 1998 XH ute. I have a few issues before I can get her on the road, the major one being a shiny yellow sticker in the left hand corner of the windscreen :evil:. It's an auto.

There's a few things I can't quite nut out, The first one being the door locks. The door locks cycle when I try to lock with the key and the remote. When I bought it the car wouldn't start and I think the smart lock was replaced to rectify this issue(Not 100% sure). Not sure on what to do there. I notice when pulling the door lock fuse that there is only one terminal lug for the fuse to plug into? Could this be the issue, Also upon further inspection I believe there is no wire connected to this lug but the locks still cycle?

Secondly, The horn. When I press the horn button I can hear the relay going on and off so I'm pretty confident its not the relay but the horn still doesn't work. Will replacing the actual horn itself fix this issue?

The drivers side door has a bit of rust below the hinge which has made the door drop enough for it to be a pain in the a** to shut. Is it worth getting a plate welded in the door or to just get a new door from the wreckers? On the topic of rust, the drivers side sill under the door has rusted through in a small area, is welding in new metal worth the time and effort or is there a filler I could use that would achieve the same effect.

Lastly the paint. As you all know the paint on these fords peel over time and I was wondering what clear coat to use, how much prep does it need, best way to apply and how to tell if the exposed paint is still any good?

Now I have the issues out of the way, this is a Mods site right? So why not mod the ol' girl. What are some mods that can be done and you guys could recommend. Money is not an issue as this is a long term project and I plan on keeping it.

Current mod ideas:
Exhaust (2.5 good? If so any particular brands?), Extractors?, Upgrade headlights (Previously had EL And couldn't see S**t at night!), 'Maybe' lower(not sure if I should.).

Sorry if these questions have been asked a million times, if they have I'd quite happily be pointed in the right direction to view the threads. First post on here so forgive me. :)

Cheers,
Josh.
Top
 Profile  
 
 
 Post subject: Re: XH with a few issues.
Posted: Mon Dec 16, 2013 9:10 pm 
Fordmods Newbie
Offline

Age: 30

Posts: 3

Joined: 9th Dec 2013

Ride: xh long reach

Location: Melbourne
VIC, Australia

Is there nobody out there with even the slightest answer?! :(
Top
 Profile  
 
 
 Post subject: Re: XH with a few issues.
Posted: Mon Dec 16, 2013 9:33 pm 
Fordmods Junkie
Online
User avatar

Posts: 3972

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

{USERNAME} wrote:
Hi,

I recently bought a 1998 XH ute. I have a few issues before I can get her on the road, the major one being a shiny yellow sticker in the left hand corner of the windscreen :evil:. It's an auto.

There's a few things I can't quite nut out, The first one being the door locks. The door locks cycle when I try to lock with the key and the remote. When I bought it the car wouldn't start and I think the smart lock was replaced to rectify this issue(Not 100% sure). Not sure on what to do there. I notice when pulling the door lock fuse that there is only one terminal lug for the fuse to plug into? Could this be the issue, Also upon further inspection I believe there is no wire connected to this lug but the locks still cycle?

sorry i dont have any idea


Secondly, The horn. When I press the horn button I can hear the relay going on and off so I'm pretty confident its not the relay but the horn still doesn't work. Will replacing the actual horn itself fix this issue?

if you are able to ... short the horn directly to the battery with a heavy duty wire. if it dont work - its stuffed



The drivers side door has a bit of rust below the hinge which has made the door drop enough for it to be a pain in the a** to shut. Is it worth getting a plate welded in the door or to just get a new door from the wreckers? On the topic of rust, the drivers side sill under the door has rusted through in a small area, is welding in new metal worth the time and effort or is there a filler I could use that would achieve the same effect.

always best to replace rusted sections with clean by welding


Lastly the paint. As you all know the paint on these fords peel over time and I was wondering what clear coat to use, how much prep does it need, best way to apply and how to tell if the exposed paint is still any good?

cant help ya

Now I have the issues out of the way, this is a Mods site right? So why not mod the ol' girl. What are some mods that can be done and you guys could recommend. Money is not an issue as this is a long term project and I plan on keeping it.

Current mod ideas:
Exhaust (2.5 good? If so any particular brands?), Extractors?, Upgrade headlights (Previously had EL And couldn't see S**t at night!), 'Maybe' lower(not sure if I should.).

Sorry if these questions have been asked a million times, if they have I'd quite happily be pointed in the right direction to view the threads. First post on here so forgive me. :)

try a search for answers

think most here are using 2.5 exhaust & extractors .... kinda depends on where ya wanna go with ya engine



Cheers,
Josh.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 22, 2024 2:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names