Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

platinum plugs on a barra/ rebuild injectors? 

 

Page 1 of 1 [ 8 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
bry40l
 Post subject: platinum plugs on a barra/ rebuild injectors?
Posted: Fri Dec 27, 2013 1:55 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
So I decided to start chasing my high fuel consumption problem again and found ford factory plugs snd platinum plugs are close in pricing on ebay. So I bought the platinum (4prong) spark plugs. Anyone tryed them before and whats your thoughts on them?


also found stock bosch injectors on evilbay for $200
but i have a spare barra motor and could give those injectors a clean.
but i found a injector rebuild kit for $20 (filter and o ring kit by the looks)
are they hard to pull down and rebuild? if so i might just do that!
my father inlaw is pretty good with engines and car parts so if its something that doesnt need special tools i think we should be ok.

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: platinum plugs on a barra/ rebuild injectors?
Posted: Sat Dec 28, 2013 1:42 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
I would stick with the factory plugs, as they are iridium plugs...
Top
 Profile  
 
 
bry40l
 Post subject: Re: platinum plugs on a barra/ rebuild injectors?
Posted: Fri Jan 03, 2014 8:07 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
Platinum plugs seem better after a run around the block. Car runs really smoothly. Less fuel on the average L/100

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
bry40l
 Post subject: Re: platinum plugs on a barra/ rebuild injectors?
Posted: Fri Jan 03, 2014 2:45 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
Ok so I have a thought about where my fuels going. When the cars at 1 throttle position its using stuff all fuel on the instant L/100km. (Lean cruise ?)But as soon as the throttles touched it goes through the roof (20+l/100) at the slight throttle adjustment. So im thinking the fuel regulator is rooted and lean cruise is the only thing able to compensate for the added fuel? Its a common problem for extra fuel usage in the B series so I think im on the right track

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: platinum plugs on a barra/ rebuild injectors?
Posted: Fri Jan 03, 2014 2:49 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
that's normal.. put it full throttle and watch it go over 70 ltrs per 100 instant
Top
 Profile  
 
 
bry40l
 Post subject: Re: platinum plugs on a barra/ rebuild injectors?
Posted: Sat Jan 04, 2014 12:22 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
I still believe theres a problem somewhere as anyone who complains about the same fuel consumption as me seems to find the problem and get it back to close to the standard amount of L/100

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
Coretex
 Post subject: Re: platinum plugs on a barra/ rebuild injectors?
Posted: Mon Jan 06, 2014 11:27 pm 
Parts Gopher
Offline

Age: 32

Posts: 66

Joined: 13th Mar 2012

Ride: 2003 BA Falcon XR6

Location: Adelaide
SA, Australia
My BA drinks fuel and a bit of a rough idle, I was thinking fuel pressure regulator changeover at some stage might be a good place to go next!
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 8 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: Google [Bot] and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 2:05 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names