|
| kboot6 |
|
||
|
i have an bf f6 ute and want to know how i would set this up and if anyone has done this before!
 Cheers fellas |
||
| Top | |
||
| cjh |
|
|||
|
Does it have 4 channel ABS ???
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| kboot6 |
|
||
|
Yes it does !
I could remove it and put the non abs in from a bf xl ute |
||
| Top | |
||
| cjh |
|
|||
|
Sounds like a lot of work for a "Toy" to be installed.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| kboot6 |
|
||
|
a fun toy that will hold up longer than the cable handbrake
|
||
| Top | |
||
| cjh |
|
|||
|
kboot6 wrote: a fun toy that will hold up longer than the cable handbrake That still depends on the maintainence regime too.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| kboot6 |
|
||
|
but if i could use the rear callipers other than the the handbrake shoe
|
||
| Top | |
||
| cjh |
|
|||
|
kboot6 wrote: but if i could use the rear callipers other than the the handbrake shoe I know what you mean there......EA to ED rear calipers were great in that respect.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| kboot6 |
|
||
|
Is that how they were hooked up was it?
Would i run the handbrake inline with the rear brakes? |
||
| Top | |
||
| xcabbi |
|
||
|
cjh wrote: kboot6 wrote: but if i could use the rear callipers other than the the handbrake shoe I know what you mean there......EA to ED rear calipers were great in that respect. Wasn't it XD to ED? My old XF had that same brake setup and funnily enough so did my 92 corsair. |
||
| Top | |
||
| cjh |
|
|||
|
xcabbi wrote: cjh wrote: kboot6 wrote: but if i could use the rear callipers other than the the handbrake shoe I know what you mean there......EA to ED rear calipers were great in that respect. Wasn't it XD to ED? My old XF had that same brake setup and funnily enough so did my 92 corsair. Well....actually, it was XB....first rear disc brake Falcon.....XB = Xtra Brakes.....  XB through to XF had ventilated rear brake rotors, then went solid after that ( EA's ) till the FPV go-fast brakes came out...whenever that was...???
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
could be done
would need to be a seperate line added to the rear brake lines and would need a non return valve fitted to the main brake line I would be speaking to a hydraulic companay about what would need to be done as im not sure how much fluid needs to come back through the lines when the brake pedal is released and if a non return valve will stop this sure you could always just block off the rear brake lines from the ABS unit.. install the handbrake in its place BUT you would have a drop in braking performance as no rear brakes when pedal depressed
_________________ RIP SCOTT |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
