|
| Dwj351 |
|
||
|
Hi all just need some help I am looking at getting a set of AU electric seats from a series 3 Fairmont and installing in to my falcon Wagon.
is this an easy plug and play approach are is it linked in to a bigger system as I know that it has a memory system as well. has any one done this or know what I am in for?? thanks Doug |
||
| Top | |
||
| Matt_jew |
|
||
|
The memory controller is in the drivers door.
They all link together. The mirrors are connected to the memory system as well and are different to a normal mirror.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Dwj351 |
|
||
|
do all I have to do is supply power to the memory supply box or would there be more involved do you think?
Thank Matt |
||
| Top | |
||
| TimmyA |
|
||||||
|
See attached... Then it depends where these modules are mounted as to how hard it is to get wiring to them...
Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
||||||
| Top | |
||||||
| snap0964 |
|
|||
|
The seat module is under the drivers seat - from memory, the mirror module links to it.
It depends if you want the mirrors to position with the seat position - the mirror module also dips the mirrors when reversing, there is a tech doc in the AU section on how to set that up. The mirror module sits up near the electric mirror switch - behind the door card, just looks like a small cct card. It seems to be optional in AU/BA Ghias and Fairlanes.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Snap,
That would explain why the reverse light wire also feeds into it... It also has a speed input so something must change with road speed too... The wiring shows 3 wires linking the modules together and what appears to be special mirrors which have power and earth and then a bus signal wire for control... probably as rare as rocking horse s**t should one ever fail... The memory thing seems like it would turn out to be more a PITA than a help... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Dwj351 |
|
||
|
Thanks For this Guys I am going to see him on the weekend and find out how much he wants for it all. knowing that I am going to need a fair be of this now to get it to work I hope he does not over charge to much.
will let you know how I go with it all thanks Doug |
||
| Top | |
||
| wezzo2010 |
|
||
|
Gday mate, how much did you end up getting one for and how was the fit? easy?
|
||
| Top | |
||
| Dwj351 |
|
||
|
I am going to look tomorrow at it all mate I and getting the full set for about 300 but if I can make it work its going to be a pain in the back
|
||
| Top | |
||
| Dwj351 |
|
||
|
got the whole Trim Set 350 with the wood wheel also, so seats door trims wheel carpet centre console, rear window regs Window Switches everything apart from the dash cant be a*** changing the dash over apart from that not a bad deal at all.
now for the fun part changing it all over, how hard it is to change the rear windows to winder to electric?? |
||
| Top | |
||
| Dwj351 |
|
||
|
I need the colour code for the drivers seat wire plug if any one out there had it so i can wire up this drivers seat can any one help please
|
||
| Top | |
||
| wezzo2010 |
|
||
|
would love that myself mate
|
||
| Top | |
||
| wezzo2010 |
|
||
|
how did you go with this, did you get the color code?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 78 guests |
