Fordmods Logo

el base timing and isc 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: el base timing and isc
Posted: Thu Feb 06, 2014 1:14 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

Hi there,
I just disconnected my isc and found that driveability is 100% better, but i just decided that i want to retard my base timing a little but then.. heres the question lol

I thought, if my isc is diconnected when i goto set my base timing will it still behave as it should and drop the idle after 2 mins etc? Or do i have to reconnect the isc and reset my base idle again? Is there any harm in trying to do it with the isc disconnected? (Only because im lazy. But willing to do what i have to lol)

Cheers all 8-)

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 1:35 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

why are you wanting to retard the timing?
Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 3:16 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

Fuel prices where i am have gone up and i want her to be able to run atleast prem95 without pinging. At the moment she requires 98, but i also have a strange sound between 1800 and 2600 that sounds like pinging but is possibly a small exhaust leak, so retarding the timing back to TDC or 1 or 2 degree advanced will eliminate whether it is pinging or an exhaust leak.

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 4:12 pm 
Stock as a Rock
Offline
User avatar

Posts: 181

Joined: 10th Jan 2014

Ride: BFII Super Pursuit

Location: Adelaide
SA, Australia

If you are worried about fuel prices you're better off not driving an XR6 :P
My EB XR6 might aswell have been an 8 for all she drank hahaha.

 

_________________

It's always funny until someone gets hurt. Then it's just hilarious.
-Bill Hicks

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 4:37 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

Dont get smart lol :twisted: i love my xr, im mainly worried about the possible pinging, not too fussed on petrol prices but still, 1.80 for 98 is pretty insane.

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 4:46 pm 
Stock as a Rock
Offline
User avatar

Posts: 181

Joined: 10th Jan 2014

Ride: BFII Super Pursuit

Location: Adelaide
SA, Australia

Hahaha :twisted:

I'm surprised you need to run 98 at all. I had advance on my EB XR and it'd still run fine on regular.

 

_________________

It's always funny until someone gets hurt. Then it's just hilarious.
-Bill Hicks

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 4:50 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

I do it to prevent any case of pinging. Plus i noticed an exceptional difference in power and economy when switching from 91 to permanent 98. Gave her alot more down low pull and seemed to idle and just run smoother completely. so i havnt gone back, but its possible if fuel remains so dear, id prefer to keep her on 98, but we'll see :wink:

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 4:51 pm 
Stock as a Rock
Offline
User avatar

Posts: 181

Joined: 10th Jan 2014

Ride: BFII Super Pursuit

Location: Adelaide
SA, Australia

She neeeds premium dude! PREEEEEMIUM!

 

 

Attachments:
13916656988900.jpg
13916656988900.jpg [ 28.48 KiB | Viewed 292 times ]

 

_________________

It's always funny until someone gets hurt. Then it's just hilarious.
-Bill Hicks

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 4:53 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

Premium all the way :twisted: but anyways,

Would be great if someone could help me out with my original question? Ahah

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 5:12 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Why not go out and try dropping the car into diagnostic mode. If it doesn't work plug in the ics and do it properly.
The amount of time youv wasted here talking to your mate you could've already done the job.
Also im 99% sure my el needed the ics plugged in for diagnostic mode.

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 6:09 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

Lol. Not a mate dont know him. And i wasnt sure if it would do any harm if you hadve read my post properly. But thanks. If yours needed it plugged in then thats all i need to know. Cheers.

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
 
 Post subject: Re: el base timing and isc
Posted: Thu Feb 06, 2014 6:10 pm 
Stock as a Rock
Offline
User avatar

Posts: 181

Joined: 10th Jan 2014

Ride: BFII Super Pursuit

Location: Adelaide
SA, Australia

bry40l wrote:
The amount of time youv wasted here talking to your mate you could've already done the job. .

 

 

Attachments:
images.jpeg
images.jpeg [ 5.96 KiB | Viewed 1644 times ]

 

_________________

It's always funny until someone gets hurt. Then it's just hilarious.
-Bill Hicks

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 12:47 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names