|
| bennywabbit94 |
|
||
|
Hi guys I've done my brake booster and lost my vacuum in the brakes and sucks to push it in. What's involved in changing the brake booster? Any help muchly appreciated.
Cheers Ben |
||
| Top | |
||
| Esteven8 |
|
|||
|
THIS is for EF/L, but I imagine it would be the same for the XH.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| sooty72 |
|
|||
|
Yes - same as EF/EL.
Beware - they are made of plastic, so DON'T over tighten the bolts, or it will fail again. If your careful you can replace the booster without disconnecting the lines from the master cylinder. Good luck. 
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| bennywabbit94 |
|
||
|
Have just put my booster in and now brake lights aren't working, is there anything I can do?
Regards Ben |
||
| Top | |
||
| Esteven8 |
|
|||
|
bennywabbit94 wrote: Have just put my booster in and now brake lights aren't working, is there anything I can do? Regards Ben Recheck the brake light switch isn't loose. They are a really touchy P.O.S. If still no joy, you will need to replace it.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| SWC |
|
||
|
Did you install your brake switch properly?
|
||
| Top | |
||
| TROYMAN |
|
||
|
thread moved to "gearbox, suspension. BRAKE & driveline workshop...
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
