Fordmods Logo

ford xw and xd fuel sender info needed . 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: ford xw and xd fuel sender info needed .
Posted: Mon Jan 13, 2014 9:35 am 
Oompa Loompa
Offline

Age: 59

Posts: 34

Joined: 31st Mar 2007

Location: renmark
SA, Australia

hi, i put a xw fuel tank into a xd .

xw fuel sender resistance.
xd fuel sender capacitance ?. or voltage ?

in the process of converting the xw sender to read on the xd dash.

does any body know what the xw fuel sender resistances are from empty to full ?

and the capacitance or voltage readings from a xd sender unit from empty to full ?

mark.
Top
 Profile  
 
 
 Post subject: Re: ford xw and xd fuel sender info needed .
Posted: Mon Jan 13, 2014 11:39 am 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

XW is resistance sender, and XD is a capacitance sender.

Three options - one is to find an XD Sender that is the right depth, and use that with the XW sender. The XD Wagon one (and XE) may suit

The alternate is to get an XW fuel gauge, and move/modify its electronics over to the XD. Be warned though - you may need to loose your low fuel light

Third option is to look the XW Sender resistance, and the EA/EB/ED Sender resistance and see if they are close : if they are, the electronics (gauge, motor etc) from an EB or similar might be easier to move over. Worth noting that there are two ranges for fuel senders in E Series - EA, EB Series one, and I think it changes at EB II through to EL but Im not 100% sure where the change is

Nigel
Top
 Profile  
 
 
 Post subject: Re: ford xw and xd fuel sender info needed .
Posted: Sat Mar 15, 2014 1:08 pm 
Fordmods Newbie
Offline

Age: 70

Posts: 6

Joined: 25th Sep 2013

Ride: BMW

Location: Brisbane
QLD, Australia

XW
Empty: 73 ohms
Half: 25 ohms
Full: 10 ohms

XD
Empty: 0-15 ohms (0.2v)
Half: 155-200 ohms (2.6v)
Full: 280-300 ohms (4.2v)

Note: Unlike the XW sender which sends impedance level to the gauge, the XD sender sends a small voltage to the gauge, so the XD gauge operates on voltage, derived from resistance of the 12 volt current, converted from the capacitance type sender (crazy, yes).

It's a big problem to convert the signal as the XW ranges from high to low impedance from empty to full, and the XD ranges from low to high impedance from empty to full.

Would be easier to adapt an XD XE XF (all the same) sender to the XW tank.
Top
 Profile  
 
 
 Post subject: Re: ford xw and xd fuel sender info needed .
Posted: Sat Mar 15, 2014 1:13 pm 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Actually thats a perfect use for one of the LPG Gauge interfaces...
The ones that convert a 0-90 sender to The XDEF Fuel Gauge.

They used to be very common - now not so much. I chucked on in the bin about 2 weeks ago

Nigel
Top
 Profile  
 
 
 Post subject: Re: ford xw and xd fuel sender info needed .
Posted: Sun Mar 16, 2014 6:52 am 
Getting Side Ways
Offline

Posts: 496

Joined: 14th Sep 2011

Ride: BF II Gas Ute

Location: Canberra
ACT, Australia

Hi,

The Wagons and Utes had a metal tank ( from memory ) so you could weld in the mount for the XD sender. I knew someone who did this to fit an XD cluster in an earlier model Ford. The sedan also had a taller sender from what I remember.

 

_________________

Regards 96ELGli

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 6:05 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names