|
| Pakrat |
|
||
|
Ok. So the bush on the end of my Au's clutch fork that holds the cable has layed open, as they do.
Now apparently they are now obsolete and repco/burson can't get them. What am I ment to do now? |
||
| Top | |
||
| MAD |
|
|||
|
||||
| Top | |
|||
| Pakrat |
|
||
|
Looks different, still works the same?
|
||
| Top | |
||
| TROYMAN |
|
||
|
its no longer a dampener, its just a direct hook to replace the dampener..
it will still work, the only thing I would think would be different is you may feel some vibration through the clutch pedal.. |
||
| Top | |
||
| Pakrat |
|
||
|
Well Ive bought one. Should be here today. See how it goes, if it's good I'll get one for my car.
I asked about warranty. "if you can break it, I'll buy you a knew car" challenge accepted |
||
| Top | |
||
| TROYMAN |
|
||
|
the cable will break first
|
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: its no longer a dampener, its just a direct hook to replace the dampener.. it will still work, the only thing I would think would be different is you may feel some vibration through the clutch pedal.. I have altered my clutch arrangement so that the throw-out bearing isn't in constant contact with the pressure plate fingers. I had to install a pedal stop and a return spring at the fork end. No vibes. I run a PBR RPM clutch kit.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Pakrat |
|
||
|
Well I've installed it.
Works as it should, has a new cable and pedalbox re enforced, fire wall is still good. No vibrations either, thanks alot for the tip off. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Mad2 and 41 guests |
