|
| xcabbi |
|
||
|
An AU with E series sized accessory pullies would be underdriven.
|
||
| Top | |
||
| TROYMAN |
|
||
|
there are a few differences that make it a no go..
harmonic balancer from e series cant be used. the water pump pulley has different bolt spacing, I guess it could be re drilled.. but from what I can see the major part in underdriving is the harmonic balancer size. which no one does for au. |
||
| Top | |
||
| xcabbi |
|
||
|
Keep the AU harmonic balancer. Turn up a custom pulley set in E series sizing but Au offset for the water pump, alternator and power steering.
Where has the vision gone people? |
||
| Top | |
||
| TROYMAN |
|
||
|
I think it comes down to alot of money and or work to get custom pullies for such a small gain..
|
||
| Top | |
||
| Shortshift |
|
|||
|
What happened to the EGR spacer on the 200kw & 220kw motors? I notice I've got one on my engine (which I assume is a 185kw motor
 ).
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| WARMACHINE |
|
||
|
There just isnt enough $$$ in it for companies to pick up and start producing them(underdrives).
|
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: What happened to the EGR spacer on the 200kw & 220kw motors? I notice I've got one on my engine (which I assume is a 185kw motor ).the au don't run the egr so the 175,185 and 200kw runs the same throttle body with that blank spacer. the 220kw just has a deeper throttle body with no spacer. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
