|
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
gogetta wrote: what other mods do u have?
the usual intake and exhaust mods machined head/AU gasket Crow springs 1543b cam ChipTorque with tune T5 manual 158,000km's on the motor |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
Thought i would dial in the cam today cause ive got the correct tools but never bothered doing it intially.
To my surprise, the cam was already EXACTLY in the correct position.... to the f**k 0.001" of an inch...... this was sitting at "0" on the vernier gear. So no gains to be made there lol |
||
| Top | |
||
| USELESS |
|
||
|
Dyno reading is a croc of crap!! If your car is feels faster then it probably is!! You have crow springs right? Can you hear funny noises?.
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
USELESS wrote: Dyno reading is a croc of crap!! If your car is feels faster then it probably is!! You have crow springs right? Can you hear funny noises?.
yeah after driving it for awhile i believe its as strong as before, but with a single spinner diff its hard to get power down, so track times lie to me as well lol |
||
| Top | |
||
| SIK__M8 |
|
|||
|
wat did ya do with the old cam i'd like to give me new EL a little more ooomph if you wanna part with the Wade 977b?
_________________ AU II XR8 REBEL!!! EB TURBO 6!!! |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
SIK__M8 wrote: wat did ya do with the old cam i'd like to give me new EL a little more ooomph if you wanna part with the Wade 977b?
nah was sold few weeks ago |
||
| Top | |
||
| FAST-XR. |
|
||
|
Quote: Thought i would dial in the cam today cause ive got the correct tools but never bothered doing it intially.
why is it that you have left it a zero? i know its probably what was resomended by the manufacturer, but if its not working properly at zero, why dont you try retarding it a degree or 2 and see how it goes?
_________________ CMS stage 3 cam, CMS stage 2 head, intake, extractors, exhaust...
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
FAST-XR. wrote: why is it that you have left it a zero? i know its probably what was resomended by the manufacturer, but if its not working properly at zero, why dont you try retarding it a degree or 2 and see how it goes? i left it at zero initially, but when got to dialling in the cam, i didnt have to touch it as it was already making the specified lift at "0" on the vernier gear i found I know what you mean by experimenting with it at different positions, but its already running nice and the gripe that i had with making less power than the other cam is only numbers on a graph luckily..... as it still feels strong. Just waiting on fitting lsd before i hit the track, maybe even slicks as i would like to launch how grechie did with his awesome time, as he's got the same gearing in the box and diff as me. |
||
| Top | |
||
| FAST-XR. |
|
||
|
cool, what time do you hope to run?
_________________ CMS stage 3 cam, CMS stage 2 head, intake, extractors, exhaust...
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
gee i'd be happy with something like the time in your sig
|
||
| Top | |
||
| racer |
|
||
|
Fordfairmont i have the the wade 977b-114 in my engine. I am very happy with it but i would like a little more up top. I got the wade 1521a -114 and was not happy with it. On the dyno i gained 3 extra kw but lost 30 nm of torque and yes i did feel it when driving my car. I put my 977b-114 back in and felt the torque straight away back again. I do love the 977b-114 cam but i feel it lacks a little top end.
I was looking at the wade 1543B cam that you have tryed. I just like to know from your experiance which cam you liked overall the wade 977b or the 1543b cam ? And yes i know it's been a while according to this thread. I also like to know what lobe seperation was your 977b cam ?
_________________ FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac. |
||
| Top | |
||
| GeZza200 |
|
||
|
I haven't tried either of those cams racer but why don't you try a CMS cam? They do make some awesome power and you already have a head from them.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
Racer, the 1543b didnt work well in my car, however it later went into another members EB with same mods but with extensive headwork and the car was a beast. The headwork seemed to be the key to its performance.
The 977b, i cant remember the lobe sep, i experimented with a couple variations. If you do a search with my username as an author, and the cam profile as a keyword, you should find alot of posts of me babbling shiit and being real enthusiastic about it all. My fav cam was the 1521a with 112 lobe sep,......... lumpy idle and screaming top end. |
||
| Top | |
||
| ranga83 |
|
||
|
racer, I had the 977b-114 then changed it to a 977b-110. that was fun in the manual, stock tickford head. made 154rwkw, but had more in it but the programmer stopped working while tuning. im now running a 1214a (I think it is) which is just smaller than the 1521a. running a safe tune at the moment til I can get on the dyno to tune it fully. very happy with it so far. I also have a 1543b waiting to go in when my worked head gets back.
I could probably get my mates 977b-110 if you want one. he isn't using it ATM and we are going to run an au head/cam when I build his new engine
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| racer |
|
||
|
Thanks for that ranga83. But i am sticking with the 977B -114. am happy with it but lacks a little up high. I do drive my car everyday though. Next step is turbo from here. i do want to take car off the road to restore it into a show/weekend worrier car.
Thank you fordfairmont for your reply.
_________________ FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 51 guests |
