|
| Lowlane7 |
|
||
|
Im looking for a set of the 35mm hub spacers so I can bolt on some BA rims to the fairlane..
Trouble is, a month ago I found heaps of sets of 4 for around $150-$200.. But now I need them I can only find pairs for $170? although I guess I could stop being a Jew and spend an extra $50, its just interesting they have gone up and the ones i was looking at arent re advertised.. Anyone know of a place who makes them, high quality of course, with high tensile studs and the hub eccentric ring (center locator)? Or if anyone has a set for sale?
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| SWC |
|
||
|
If you want High Quality, you are going to pay more than $150 for 4. Go to your local wheel place and get a price on quality ones and see what you will pay.
|
||
| Top | |
||
| ranga83 |
|
||
|
did you mean these? http://www.ebay.com.au/itm/Ford-Falcon- ... 19efe03f0e
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Lowlane7 |
|
||
|
Yeah except those ones don't have the center ring like these do...
Attachment: spacers.jpg [ 44.38 KiB | Viewed 253 times ] locators to guarantee the wheels are straight on the hub.. that set above was going for $180 or so for 4.. But now I can only find them in pairs for $170..
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| SWC |
|
||
|
What your after is actually 30mm spacer as the E series is already +6mm. Add 30mm and you get +36mm, AU-FG offset.
|
||
| Top | |
||
| Lowlane7 |
|
||
|
Good point there.
So 35s will make them stick out 5mm further. Being lowered and slightly tucking tyre that might be the bit too much they need to scrape/hit the guard more.. I'll track that down..
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| SWC |
|
||
|
Go and talk to Bob Jane Alice Springs.
In NSW, they will supply but not fit, due to legality of hub adaptors. Not sure about NT regs. |
||
| Top | |
||
| 67RCE |
|
||
|
Lowlane7 wrote: Good point there. So 35s will make them stick out 5mm further. Being lowered and slightly tucking tyre that might be the bit too much they need to scrape/hit the guard more.. I'll track that down.. I doubt they would hit. I had wheels that sat 30mm out from the average 8" wide wheel (front) and 70mm on the rear with nothing more than rolled guards.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Lowlane7 |
|
||
|
SWC, Im not too sure myself on regs. It seems they are legal, as they are definately a "safer" method of adapting, being actually bolted to the hub rather than being shim type spacers..
A mate got a set of AU offset rims at a tyre place and they supplied him with the adapters to fit them, I called the same mob and they said they can get them but I have to sign a waiver to say they have no responsibility if anything happens. @67RCE Im only fitting BA XR6 rims, so they arent gonna be too much wider than the 15s anyway, I was more thinking the front because i somtimes clip the tyre when turning up a gutter.. I could probably just drive more carefully.... 
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 109 guests |