|
| ranga83 |
|
||
|
{USERNAME} wrote: Nice, how much did it cost you? $160 from WADE cams, was what the biggest they had left on the shelf when they closed down.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| GeZza200 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Go for a 1645b instead of the 1521. 0.556lift 221 duration @50 i think. Im running one now. Yet to be tuned but its fkn awesome when does that cam start pulling? Is your rev limiter raised? its raised to 6300rpm, it comes on hard as soon as you touch the throttle all the way to the limiter. my bad just realized that was for ranga83 all good haha, what cam are you running? Its a custom billet cam from CVE.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| sliding6 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Go for a 1645b instead of the 1521. 0.556lift 221 duration @50 i think. Im running one now. Yet to be tuned but its fkn awesome when does that cam start pulling? Is your rev limiter raised? its raised to 6300rpm, it comes on hard as soon as you touch the throttle all the way to the limiter. my bad just realized that was for ranga83 all good haha, what cam are you running? Its a custom billet cam from CVE. Specs? |
||
| Top | |
||
| sliding6 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Nice, how much did it cost you? $160 from WADE cams, was what the biggest they had left on the shelf when they closed down. Thats sounds alright |
||
| Top | |
||
| ranga83 |
|
||
|
have you had yours back on the 1/4 since the 198rwkw gezza?
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| GeZza200 |
|
||
|
CVE don't give out there cam specs, na I havnt been back with 198rwkw. I did 13.80 on my one and only run with the 185rwkw. I'm putting my ITB's, sequential injection and e85 tune before I go back. Hope for very low 13s high 12s
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Barnfind-EA |
|
||
|
{USERNAME} wrote: CVE don't give out there cam specs, na I havnt been back with 198rwkw. I did 13.80 on my one and only run with the 185rwkw. I'm putting my ITB's, sequential injection and e85 tune before I go back. Hope for very low 13s high 12s If they dont give out the cam spec, how the F is anyone supposed to install it right? |
||
| Top | |
||
| ranga83 |
|
||
|
Alot of places wont give specs. Only give specs to dial it in and thats it
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Barnfind-EA |
|
||
|
{USERNAME} wrote: Alot of places wont give specs. Only give specs to dial it in and thats it Ahhh as long as they give you enough to install it.. I was wondering. LOL |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 52 guests |