Tim, the supplied pics are from the factory EF/EL manual and only shows the Falcon/Fairlane/LTD wiring looms. check pic of headlight relays as it shows a link in falcon low beam and says its not there in the fairlane/ltd

all right guys, I checked all violet and violet/white wires in both low n high beam relays, I had power to 3 but not the fourth and that was in the low beam relay, so I started to follow the wire and got about 6in from the bottom of the relay and found this. this is the violet/white wire for low beam and shows it had worn through and I didn't notice it as the plastic was holding it in place, so just joined in a new wire n feed it back into the relay and now have head lights working. all this s**t for what turns out a very simple problem. thanks everyone for all your help and suggestion. I also have the schematics drawing for the ef xr n el xr head lights if any one wants me to post them up let me know. cheers again guys

 

 

Attachments:

DSC_0064.jpg [ 262.29 KiB | Viewed 222 times ]

DSC_0063.jpg [ 279.84 KiB | Viewed 221 times ]

lol ... don't ya just hate that aye


are the drawings differant to the pics i put up??

hey mad 2, yep hate it, spent money on stuff that in the end I didn't need, but still happy its fixed.
the schematic's I have are a little different and if you hadn't posted that colour code chart id be stuck. so you have to use that colour chart with my schematic's and a big thanks to smokin em up that info about the relays was very helpful in fact everybody was helpful so thanks again guys.

 

 

Attachments:

File comment: el exterior lighting scan0002.jpg [ 475.27 KiB | Viewed 251 times ]

File comment: ef exterior lighting scan0001.jpg [ 318.85 KiB | Viewed 208 times ]

not a problem

saved ya pics ... only differance [quick glance] is yours doesn't show the full wiring for the low beam relay to the XR lights for low/high