|
| Lowlane7 |
|
||
|
Hey everyone.
Im just looking into a set of extractors for the LTD. Hurricane or Pacemakers? Whats your opinion, what do you have, (pics too if possible)
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| 67RCE |
|
||
|
I had Pacemakers on my EB XR8. My AU will probably end up with a set of Pacemaker comps.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| WARMACHINE |
|
||
|
Honestly depending on whats done to the motor, if its close to stock any tri y extractor will do.
|
||
| Top | |
||
| NLGHIA5.0 |
|
||
|
Pacies for me.
|
||
| Top | |
||
| Lowlane7 |
|
||
|
Gonna order a set off eBay.
Pacies on eBay are $700 Hurricane are $625 Thing is tho the pacies are 2 1/4 outlet, and hurricane is 2 1/2. Im guessing if I ask though they can do a 2 1/2 set.. I already have a Y piece and exhaust @ 2 1/2. Im not short on money so thats not a biggie, but I might shop around.. Any good dealers you can recommend I call? Ill be ordering a set of underdrives as well, but just bolt on mods for now. upgrade ignition leads, coil and plugs, CAI or hi flow filter and other basics.
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| xcabbi |
|
||
|
Home built custom set?
|
||
| Top | |
||
| Lowlane7 |
|
||
|
{USERNAME} wrote: Home built custom set? Made out of copper pipe... haha, nah, what are you saying? For me to make or asking if what I have is?
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| xcabbi |
|
||
|
For you to make.
500 bucks gets you 2 headder flanges plates, 2 collectors, 2 collector flanges and gaskets, oh and 32 bends shipped to your door. More than enough for you to make a few mistakes with and still end up with a half decent set of extractors that you can be proud of having made yourself. |
||
| Top | |
||
| Lowlane7 |
|
||
|
HMMMMmmmmmm
Interdasting!!! Ive been looking at Redback exhaust systems too.. Local supplier just quoted me $850 for the headers alone!!!
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Shortshift |
|
|||
|
{USERNAME} wrote: More than enough for you to make a few mistakes with and still end up with a half decent set of extractors that you can be proud of having made yourself. Some of us could burn some big holes through 32 bits of tube!  @ Lowlane7 - Have a look at the Best Mufflers website. I bought a set of Hurricanes from them for my V8 ute. They seem to work well, especially after getting them ceramic coated inside and out.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| xcabbi |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: More than enough for you to make a few mistakes with and still end up with a half decent set of extractors that you can be proud of having made yourself. Some of us could burn some big holes through 32 bits of tube! If its the right grade of steel and its easy enough to weld, before you know it you could close close a hole the size of your head up to be air tight just by pad welding 
|
||
| Top | |
||
| Lowlane7 |
|
||
|
Best mufflers.. Ill have a look-see.. Cheers.
I have spot filled some pretty big craters. The trainer at the welding courses I did was pretty impressed.. Don't have a decent set up welder though. My best work was with Gas MIG.
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| ToranaGuy |
|
|||
|
I've got pacemaker's on my red Eb Xr8 with Au Gt40p heads, and I have genie's on my White Eb Xr8 with stock E7 heads. The pacies look a bit better, but they are both a huge improvement over stock!
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| 347ef |
|
||
|
I have hurricane 4-1's windsor had to crush pipes a bit more to get bolts in and leaked like a sieve at merge of 4 into 1
_________________ ford 5.0l shortblock, 347 stroker kit, 190cc aluminium heads, xfi248hr-14 cam, Parker funnelweb manifold, 1.6 roller rockers, 850cfm demon carb, |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
