|
| Smazz |
|
||
|
Hi guys,
So I drive a 95' EF Falcon GLi, and while looking around I found this BA mk2 GT original muffler and tail section, is there any way that I could fit it to my EF? Has anyone done this or similar? https://scontent-a-lax.xx.fbcdn.net/hph ... 4680_n.jpg Need answers asap please. |
||
| Top | |
||
| Darcy4524 |
|
||
|
I'm not certain but I'm going to say no as the ba had irs.
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Lowlane7 |
|
||
|
Yeah totally different rear ends...
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| Smazz |
|
||
|
Okay, thanks guys.
|
||
| Top | |
||
| Darcy4524 |
|
||
|
Not a problem
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| SWC |
|
||
|
Smazz wrote: Hi guys, So I drive a 95' EF Falcon GLi, and while looking around I found this BA mk2 GT original muffler and tail section, is there any way that I could fit it to my EF? Has anyone done this or similar? https://scontent-a-lax.xx.fbcdn.net/hph ... 4680_n.jpg Need answers asap please. Pipework does not go over the diff like E Series as the BA's use IRS. Also it is twin system and the muffler would need to be rotated so it is located vertically not horizontal like the BA. Look under the rear of you EF and you will see how the rear muffler is positioned. By the time you modified the muffler to fit along with the pipework, you could fit a custom system. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
