|
| creeture3 |
|
||
|
Well, after due deliberation, I lashed out and bought a J3 from T.I. Performance.
Should have done it years ago!! Best $200 I have spent for a long time! Much more torque, and better acceleration. The engine just seems much more tractable. Jason has also been answering my (sometimes) inane questions, and has been very helpful. Installation was simple: 30 mins Would recommend it to anybody 
|
||
| Top | |
||
| ranga83 |
|
||
|
30 minutes? Takes me 5 now haha
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| creeture3 |
|
||
|
Quote: 30 minutes? Takes me 5 now haha  
|
||
| Top | |
||
| snap0964 |
|
|||
|
ranga83 wrote: 30 minutes? Takes me 5 now haha HaHa . . . If you have a record breaking way of cleaning the gunk off the ECU J3 port . . . . 
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| ranga83 |
|
||
|
ive done it that many times its not funny, I don't even pull the ecu apart anymore
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
I always pull them apart to get proper access to the back side for sanding and an alcohol wipe. Nothing worse than a poor contact 3 months down the track.
Thanks for the kind words creeture3! Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| snap0964 |
|
|||
|
galapogos01 wrote: Nothing worse than a poor contact 3 months down the track. I cleaned mine I thought very thoroughly - My J3 chip will out of the blue after a few months start playing up, crap running, won't restart. I did solder tin the ECU fingers - still the same. I find if I pull the chip, ECU runs fine, and if I pull the chip, and reseat it, car runs fine again. After a few months, same will happen. I don't disconnect power, so I don't think the KAM gets corrupted. I don't reflash the chip either, so I guess it has to be a connection issue.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Clean the port with metho or rubbing alcohol? Oils from touching the port will cause the copper to corrode over time. Could be the cause?
Another common cause is not tightly taping in the chip as per the instructions. On the extreme end, I've had customers with no kick panel and a loose ECU with untaped chip sitting with spanners and screwdrivers in the foot well! You can imagine how that ended. I've had chips sit untouched in an ECU for well over 12 months without any issue, so when done properly they can be left alone. Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Yeah, understand all that Jase - only thing as I say, I solder tinned the ECU fingers each side.
Even then though, solder does still corrode over time.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Ah, sorry I misread that as you did*n't* tin.
Solder actually corrodes more quickly and the uneven surface makes for a worse contact. If you can solder sucker it off you may find its more reliable. Cheers, Jase
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Yeah, tried to get a reasonably thin uniform surface, not easy though.
Thanks for the comments.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 12 guests |
