|
shpadounkle |
|
||
|
hey all,
can somebody please save me from myself? i had to pull the tailgate apart, and noticed there's optional holes to double up the reverse lights. can i just go 2 more 21watt lights on that tailgate loom without adding relays and/or wires from the switch? |
||
Top | |
snap0964 |
|
|||
|
Yes, you should be able to see cast in the plastic the three keyed bayonet fitting outline.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
SWC |
|
||
|
{USERNAME} wrote: hey all, can somebody please save me from myself? i had to pull the tailgate apart, and noticed there's optional holes to double up the reverse lights. can i just go 2 more 21watt lights on that tailgate loom without adding relays and/or wires from the switch? Yes can be done, very easy. As Snap said, cut out the casting, I used a dremel and fit extra lights. I used an extra set from another wagon and joined them into the existing loom. |
||
Top | |
shpadounkle |
|
||
|
thanks both for your answers.
i was more concerned about how many 21 watt globes i could run on the one existing wire. so, if you've done it and the house hasn't burnt down i give it a go. question answered. im happy. P.S. I just banged mine out with a stick. i thought they were just plugs, and they were. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 21 guests |