Fordmods Logo

EL fairmont idle and power 

 

Page 1 of 1 [ 2 posts ] 

 
 Post subject: EL fairmont idle and power
Posted: Sat Sep 13, 2014 2:48 pm 
Tyre Shredder
Offline
User avatar

Age: 46

Posts: 386

Joined: 10th Nov 2004

Ride: 1969 XT Wagon

Location: Nowra
NSW, Australia

Hi

I am having problem with my EL fairmont ghia it idles fine most of the time but occasionally when i start it, it just wont idle it will stall when i put it in gear it seems to idle ok.

The other problem is when i put my foot down to overtake another car it doesnt seem to have any power it is like it is reving more but not going much quicker kind of like it feels restricted.

Hope someone can help me out with anything.

Thanks
Top
 Profile  
 
 
 Post subject: Re: EL fairmont idle and power
Posted: Sat Sep 13, 2014 5:03 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 461

Joined: 31st Mar 2013

Ride: 96 EL XR6

Location: Hervey Bay
QLD, Australia

Couple things to check..

Fuel filter,
Fuel pump?
Fuel Regulator (unplug the vacuum line off it, block the line with a bolt and start it up, if it's better the reg is fck or it's a fuel issue as the increase in pressure in the fuel rail helps, this usually indicates blocked injectors)

(Could be running out of fuel when powering on, the above will affect idle too)

O2 sensor!! When was it last replaced? (Have a lifespan of 100k km) Can cause big dramas.. Mine would not idle without my foot on the go pedal, wouldn't power on etc, turned out the O2 was f*ck and over fuelling it, therefore flooding it,

Map sensor, the vacuum line to it has a tendency to crack, (usually you will see big puffs of black smoke under any driving/idling conditions if it's f*ck)

Ignition timing,

Blocked/collapsed cat, (does it feel like it hits a wall of air when revving it out?)


Could be a number of things,
Run a diagnostic on it and pull any codes, gives you somewhere to start from atleast,

 

_________________

EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 74 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 5:53 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names