Fordmods Logo

Ba chuffing / misfire 

 

Page 1 of 1 [ 2 posts ] 

 
 Post subject: Ba chuffing / misfire
Posted: Wed Dec 03, 2014 9:31 pm 
Fordmods Newbie
Offline

Age: 40

Posts: 18

Joined: 15th Dec 2010

Ride: 94 ef falcon gli wagon

Location: langwarrin
VIC, Australia

G'day,
Last week, virtually out of nowhere my 04 Fairmont Ghia started chuffing / misfiring at idle and when just punting around. Its defiantly more then a coil pack or injector problem as its more then one cylinder as it came all of a sudden, so its unlikely (to me) that more then one injector / coil pack would go at the same time. The fuel pump, coil packs, ecu, map sensor and fuel filter have all been done recently (within last 15,000k's / year). The interesting thing is over 3500 revs it clears up and pulls like a train while at 1500 revs it is terrible. It also seems much worse once its warmed up. Im thinking something along the lines of a stuck cam phasor, o2 sensor ect, maybe crank sensor. I have scanned the ecu and nothing came up. The ignition timing was between 15 / 35* which seemed ok?

Any ideas would be appreciated. Ive searched online and haven't found much

Thanks,
Jay
Top
 Profile  
 
 
 Post subject: Re: Ba chuffing / misfire
Posted: Thu Dec 04, 2014 7:35 pm 
Getting Side Ways
Offline

Age: 45

Posts: 1329

Joined: 5th Nov 2004

Ride: 66 Coupe

Location: Perth
WA, Australia

jay_94ef wrote:
G'day,
Last week, virtually out of nowhere my 04 Fairmont Ghia started chuffing / misfiring at idle and when just punting around. Its defiantly more then a coil pack or injector problem as its more then one cylinder as it came all of a sudden, so its unlikely (to me) that more then one injector / coil pack would go at the same time. The fuel pump, coil packs, ecu, map sensor and fuel filter have all been done recently (within last 15,000k's / year). The interesting thing is over 3500 revs it clears up and pulls like a train while at 1500 revs it is terrible. It also seems much worse once its warmed up. Im thinking something along the lines of a stuck cam phasor, o2 sensor ect, maybe crank sensor. I have scanned the ecu and nothing came up. The ignition timing was between 15 / 35* which seemed ok?

Any ideas would be appreciated. Ive searched online and haven't found much

Thanks,
Jay


check the intake manifold - spray wd40 or carb cleaner around each port its quite common for them to come loose and suck the gasket in, causing that exact issue
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 2 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 84 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 6:05 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names