Fordmods Logo

Roll centre 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Roll centre
Posted: Sat Jun 11, 2005 10:25 pm 
Stock as a Rock
Offline

Posts: 112

Joined: 24th Nov 2004

Gallery: 1 images

Ride: EF II

Location: perth
WA, Australia

hey guys,
i have been doing some reading and as most of you probably know, the locating point on the diff for the watts link was lowered 20mm between the EF and EL.
My question is; can you fit the diff housing from an EL straight onto an EF. and will it help the handling by any great margin.

Im sort of sick and tired of having to slow down excessively in the wet because the car feels like going round rounabouts sideways, would the roll centre adjustment aid in fixing this?

 

_________________

RIP Peter Brock

Lovells springs, KYB shocks, camber kit, AU XR8 snorkel, pioneer stereo, lukey straight thru exhaust, FTR XR8 mags, 35% tint and a trip computer

Top
 Profile  
 
 
Posted: Sat Jun 11, 2005 10:49 pm 
Getting Side Ways
Offline
User avatar

Age: 92

Posts: 1088

Joined: 30th Jan 2005

Gallery: 16 images

Ride: F350

Location: Brisbane
QLD, Australia

Just do it and come back and tell us how good it feels......lol

Basically, it will stop the feeling that the car pivots on the front wheel and lifts in the bum when you corner. If you lower your car it gets worse too. The arms on the watts link should run fairly parallel to the axle tubes in a perfect world.
Top
 Profile  
 
 
 Post subject: diff cover
Posted: Wed Jun 15, 2005 10:01 pm 
Getting Side Ways
Offline

Posts: 476

Joined: 28th Jan 2005

Ride: 1990 EA Spac

Location: grenfell
NSW, Australia

Just a quick question, will an EL diff cover fit on an EA diff so I can get the lower pin position???????????????

 

_________________

Drive safe, arrive alive

EA Spak EL dash and interior, thermo's,BBM, EF head and cam, superlows,

Top
 Profile  
 
 
Posted: Thu Jun 16, 2005 12:01 am 
Getting Side Ways
Offline

Age: 42

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

IIRC the diff cover from an EL will fit any borg warner/BTR78 diff

 

_________________

Banned

Top
 Profile  
 
 
Posted: Fri Jun 17, 2005 3:48 pm 
Parts Gopher
Offline

Posts: 86

Joined: 10th Nov 2004

Ride: No fords at the mo' :-(

Location: Sydney
NSW, Australia

Just one question ....

Are the Watts Link locating arms on the EL (and EF XR series ...) the same length as the arms on the EA-ED series?

Also, how do these lengths relate to the Watts Link dimensions of the XE-XF?



Cheers

 

_________________

Chasing 162mph on the Salt! 4.2L. Both race cars now sold! :-( Maybe a small-block tractor puller! or a Lotus 7 Clubman is next! or a 351-stroker powered EB ... ?

Top
 Profile  
 
 
Posted: Fri Jun 17, 2005 8:08 pm 
Getting Side Ways
Offline
User avatar

Age: 92

Posts: 1088

Joined: 30th Jan 2005

Gallery: 16 images

Ride: F350

Location: Brisbane
QLD, Australia

All the same mate....
Top
 Profile  
 
 
Posted: Fri Jun 17, 2005 9:18 pm 
Parts Gopher
Offline

Posts: 86

Joined: 10th Nov 2004

Ride: No fords at the mo' :-(

Location: Sydney
NSW, Australia

Umm all the same eh ... Hmmm

Does that include the XE-XF parts as well .... If so this may another small mod to add to my growing this 'things to do to X??' !!


Cheers

 

_________________

Chasing 162mph on the Salt! 4.2L. Both race cars now sold! :-( Maybe a small-block tractor puller! or a Lotus 7 Clubman is next! or a 351-stroker powered EB ... ?

Top
 Profile  
 
 
Posted: Fri Jun 17, 2005 10:19 pm 
Getting Side Ways
Offline
User avatar

Age: 92

Posts: 1088

Joined: 30th Jan 2005

Gallery: 16 images

Ride: F350

Location: Brisbane
QLD, Australia

Yeah mate, they will all interchange as far as I can remember.
What are you putting it into??
Top
 Profile  
 
 
Posted: Sat Jun 18, 2005 11:22 am 
Parts Gopher
Offline

Posts: 86

Joined: 10th Nov 2004

Ride: No fords at the mo' :-(

Location: Sydney
NSW, Australia

Hi 347stroker,

Not wanting to railroad the original post ... But I have a few Ford plans on the boil ... ( or more accuratley cold-water-in-a-pot ready to boil ..)

1. Is to improve my ED V8 Futura. Handling is one area and I had already looked into this Watts link arrangement .. I will go ahead with it now ..

2 & 3. Is an XF and an XE (With an XD front .. it looks better) Both of which I think will now get the EL Watts Link swap .... I have all these other parts gathering dust in the Garage ... now I am shopping for EL watts Link BW78 diff covers! times 3 thanks!

Cheers

 

_________________

Chasing 162mph on the Salt! 4.2L. Both race cars now sold! :-( Maybe a small-block tractor puller! or a Lotus 7 Clubman is next! or a 351-stroker powered EB ... ?

Top
 Profile  
 
 
Posted: Sat Jun 18, 2005 12:48 pm 
Getting Side Ways
Offline
User avatar

Age: 92

Posts: 1088

Joined: 30th Jan 2005

Gallery: 16 images

Ride: F350

Location: Brisbane
QLD, Australia

Get into it mate....sorry for making extra work for you....
Sounds like a few projects on the go.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 94 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 3:40 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names