|
| TeinaJ |
|
||
|
Just wondering if anyone knew what wires im looking for (Colours or combo's) to put in my own footwell lights? I think im looking in the right place but there isnt any wires sticking out to me.
Ive read many people saying that the wire was just hanging there or plugged into the globe holder but im wires free at the moment & struggling to identify my wires.. Any helps appreciated
_________________ Boostboostboostboostboost |
||
| Top | |
||
| TedW |
|
||
|
green with yellow trace = power from BEM module
black with blue trace = earth from BEM when light turned on |
||
| Top | |
||
| TeinaJ |
|
||
|
So connecting my wires with these should give me my light on door opening?
_________________ Boostboostboostboostboost |
||
| Top | |
||
| kwaussiekid |
|
||
|
I have a MK 1, and the bulb holders are already in place. I have had all the interior lights going for years.
_________________ The older I get the better I was! |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
{USERNAME} wrote: I have a MK 1, and the bulb holders are already in place. I have had all the interior lights going for years. So do i. Bulb holders are not there nor is the wiring tucked anywhere. Its annoying. Some had it some dont.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| kwaussiekid |
|
||
|
93EB, you may well be correct. My son was upgrading all lighting in my car,at the time, and found all the bulb holders in place. BA MK1.
_________________ The older I get the better I was! |
||
| Top | |
||
| TeinaJ |
|
||
|
All of my holders are there just no wires near.. Should they be easy to see?
_________________ Boostboostboostboostboost |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
You were one of the lucky ones. Like the OP i will need to splice into mine to do this mod also.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Teina i think you need to stick your head right under there and look for the wiring with a torch to see them.
Damm i dont even have the holders. Lol.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| TedW |
|
||
|
check behind glovebox and fusebox for plug to connect globe holders into - if none remove RH A pillar trim and check in wiring loom behind for mentioned wire colours to use to connect your own wiring to .............................
by holder you mean the fitting the globeholder locks into?? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
