Fordmods Logo

Anyone know what wires are needed to resistor trick on a el? 

 

Page 1 of 1 [ 14 posts ] 

 
 Post subject: Anyone know what wires are needed to resistor trick on a el?
Posted: Thu Oct 01, 2009 11:43 am 
Stock as a Rock
Offline
User avatar

Posts: 143

Joined: 7th Jun 2008

Location: sydney
NSW, Australia

I have a proper ford manual, but its ea-ed. the ef/el haynes manual has nothing in it.. and the wires in that auto to manual guide are different too.. the colours i have are as follows

Silver/white - Pink/green - Red - Orange/white - Pink/orange - Pink - Green/violet - Blue - Yellow - Yellow/green - Green

I've already isolated the reverse and neutral switches too.. so its out of those coloured wires listed.. any help would be greatly appreciated!!
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Thu Oct 01, 2009 6:13 pm 
Stock as a Rock
Offline
User avatar

Posts: 143

Joined: 7th Jun 2008

Location: sydney
NSW, Australia

anyone??? at least anywhere i could find a wiring diagram for an el??

Cheers Jack.
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Thu Oct 01, 2009 7:14 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 869

Joined: 12th Aug 2007

Gallery: 22 images

Ride: AU2 XR8 ute & 91 EA bitsa

Location: Melbourne
VIC, Australia

Read Voxace's guide in the first post of this thread.

fordmods-technical-documents-diy-f38/auto-to-manual-conversion-guide-t42420.html

Hope that helps.

 

_________________

AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection

Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Thu Oct 01, 2009 8:17 pm 
Stock as a Rock
Offline
User avatar

Posts: 143

Joined: 7th Jun 2008

Location: sydney
NSW, Australia

already have, wrong colours to what i have.. guessing its for ef.. thanks anyways
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 1:28 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 9:03 am 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 869

Joined: 12th Aug 2007

Gallery: 22 images

Ride: AU2 XR8 ute & 91 EA bitsa

Location: Melbourne
VIC, Australia

Have you read Troyman's writeup?

fordmods-technical-documents-diy-f38/troymans-au-engine-into-ea-conversion-using-el-ecu-updated-t40806.html?hilit=bbm%20conversion%20ecu

 

_________________

AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection

Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 4:37 pm 
Stock as a Rock
Offline
User avatar

Posts: 143

Joined: 7th Jun 2008

Location: sydney
NSW, Australia

{USERNAME} wrote:


already read this.. still doesn't help. i would be sweet if i hadn't already cut the plug off.. but now all i am left with is wire colours, to which i can't seem to find any diagrams with my colours on them..
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 5:09 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 869

Joined: 12th Aug 2007

Gallery: 22 images

Ride: AU2 XR8 ute & 91 EA bitsa

Location: Melbourne
VIC, Australia

Sorry, I think we've misunderstood what you're doing. You doing this conversion on an EL Falcon or an EA-ED?

You've cut off the entire ECU plug? :shock:

From what I've read, only a few wires need to be cut/spliced at the ECU.

 

_________________

AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection

Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 5:59 pm 
Stock as a Rock
Offline
User avatar

Posts: 143

Joined: 7th Jun 2008

Location: sydney
NSW, Australia

nah i was wanting to do it at the gearbox end... already cut the plug of that end coz the car did have a chip and big cam in it.. but as i need it drivable now i had to put the stock cam back in and take out the chip. thou the car is still manual. yes this is in a el, fairmont if it makes any difference.. didn't really want to muck with the wires out of the ecu if can be helped!
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 10:43 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 869

Joined: 12th Aug 2007

Gallery: 22 images

Ride: AU2 XR8 ute & 91 EA bitsa

Location: Melbourne
VIC, Australia

I found this thread which refers to the coloured wires you've mentioned.

gearbox-suspension-brake-driveline-f4/el-auto-to-manual-conversion-wiring-t43393.html

 

_________________

AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection

Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Fri Oct 02, 2009 11:21 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

{USERNAME} wrote:
anyone??? at least anywhere i could find a wiring diagram for an el??


An EF or EL wiring diagram will not help you. I have the genuine Ford workshop manuals for EF and EL vehicles (all 3 volumes) and the colours for both EF and EL match the colours in Voxaces guide.
The thread I linked previously I'm pretty certain is the EA to EB 3 speed automatic colours. So perhaps you have EBII to ED wiring?
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Sat Oct 03, 2009 12:23 pm 
Stock as a Rock
Offline
User avatar

Posts: 143

Joined: 7th Jun 2008

Location: sydney
NSW, Australia

its el wiring, why would ford put ed wiring into an el? The colours i have are whats listed up the top... guess i'll just have to wing it till it works......
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Sat Oct 03, 2009 9:57 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

{USERNAME} wrote:
its el wiring, why would ford put ed wiring into an el? The colours i have are whats listed up the top... guess i'll just have to wing it till it works......


Well I guess your just lucky then that you've got wiring colours different to almost every other EL - Voxaces guide is correct for EF and EL wiring (I have confirmed this with the EL wiring I had in a box, the genuine Ford workshop manusl, Gregories, Haynes and MaxEllery manuals). Perhaps your looking at the wrong wires or alternatively at some point in the 13 years the car has been around for someone, besides Ford when they made the vehicle originally, has changed something, such as perhaps a previous owner replaced the gearbox?
Either way, doesn't make a difference now as those are the wires you have. Good luck.
Top
 Profile  
 
 
 Post subject: Re: Anyone know what wires are needed to resistor trick on a el?
Posted: Sun Mar 29, 2015 6:50 pm 
Fordmods Newbie
Offline

Age: 44

Posts: 1

Joined: 29th Mar 2015

Ride: el fairmont

Location: warwick
QLD, Australia

{USERNAME} wrote:
its el wiring, why would ford put ed wiring into an el? The colours i have are whats listed up the top... guess i'll just have to wing it till it works......


i have the same as u and cant find what wire i need to be working with too
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 14 posts ] 

Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 10:07 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names