Hi All, Will an EB2 LSD bolt directly into an EB1 6cyl? Is a 3.27 lsd a 2 or 4 bolt pinion?

eb1 is bw75 series gear set with 2 pinion and 25 spline axles, same as ea.
eb2 is bw78 series gear set with 4 pinion and 28 spline axles, same as ed,ef,el and au

are ya talkin sedan, wagon or what??


i'm gunna be using a EB2 3.27 plus a AU lsd in a EB1 ..... EA1 used the uni-joint to connect between the tailshaft & diff. laters used a "plate" coupling between the tailshaft & diff. i have no idea re 2/4 bolt pinion so will go with what Troyman has said.

I am in a sedan. Can an eb2 diff be used in anEB1? Is it a matter of using the EB2 driveshaft or is there more to it (like the EB2 driveshaft not bolting up because of different front universal not bolting up) and thanks in advance for replies.

i should have said i was talking about my wagoon

pretty sure the diff will fit using the later tailshaft but not sure on IF the control arms will fit the brackets on the diff - i know one person on here made adapters to fit a later diff into a EA sedan

the only differances with the tailshaft is the rear mount and i think my EB1 has the flat plate on tailshaft/diff, but i would have to get off me arrsse and make sure