|
| jamie22_cole |
|
||||||
|
hey guys just wondering if u can tell me if my timing looks like its one tooth out or is it fine? cause I got some pinging problems at mid range rpm. uploaded some pics so u can see.
|
||||||
| Top | |
||||||
| SWC |
|
||
|
Looks about right. Timing mark on the cam gear should be approx 3mm above the head at TDC.
What cam are you running to require the Vernier Gear? |
||
| Top | |
||
| jamie22_cole |
|
|||
|
wade billet 1673 I think I got one of the last ones before they were just giving out regrinds.
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
pinging is more to do with ignition timing, fuel quality vs compression, not cam timing.
whats the ignition timing at? |
||
| Top | |
||
| jamie22_cole |
|
|||
|
pretty much tdc. can the au knock sensor play a part in pinging?
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
im guessing its a au engine ??
the knock sensor should remove timing if it detects pinging, maybe its faulty? but unless your running low octane fuel or a bad batch the engine shouldn't be relying on the knock sensor.. what fuel do you run and what heat range spark plugs are you using? |
||
| Top | |
||
| jamie22_cole |
|
|||
|
ive tried another ecu but it still pings but not as bad as my standard ecu which is my XR6 ecu I always run 98 in it as it is more noticeable with 91 in it. the spark plugs are EL XR6 ones I think there the ZGR6B-11. it is more noticeable on a warm day aswell
|
|||
| Top | |
|||
| ranga83 |
|
||
|
What fpr are you running? A standard fpr on an xr ecu will be lean
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| jamie22_cole |
|
|||
|
not sure on the fpr
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
